- Home
- Companies
- Sanghi Oxygen (BOM) Pvt. Ltd.
- Products
- Sanghi - Acetylene Water Level Plant
Sanghi - Acetylene Water Level Plant
Water Level Control: If excessive water enters the generator to cool it and the water level goes above the high-level mark, the water-level control instrument will immediately discharge the excessive water thus maintaining the water between the acceptable high and low-level marks.
This consists of two layers of regenerative chemicals, which remove additional impurities. The purifying agent may be reactivated for re-use by the atmosphere air. For continuous operation, one extra charge of chemicals can be kept in an open wooden trolley.
The equipment is installed between the chemical purifier and the high-pressure compressor, This helps to remove carry-over chemical powder from the purifier.
This is a tube bundle with water circulation. It helps to remove moisture and cool the Acetylene gas from Generator.
This is a low-pressure vessel containing Anhydrous Calcium Chloride. This absorbs moisture from the Acetylene Gas.
For filling of the cylinders, an L.R. makes reciprocating, oil lubricated, multi-stage, water submerged compressor with intercoolers, safety relief valve for each stage, driven by a 15 H.P. Flame Proof Motor confirming to IS:2148-68 (Gr. II.B) is provided.
This consists of a battery of three high-pressure vessels. The first is filled with metal filler, while the second and third are filled with anhydrous calcium chloride. It is very important that the high-pressure drier is fully filled up with Calcium Chloride, as any voids in the high-pressure area are against the required safety.