Companies
Becx Machines B.V
Products
Becx - Model HS75HR - Hedge Trimmer

Becx - Model HS75HR -Hedge Trimmer

FromBecx Machines B.V

SHARE

The Becx HS75HR is the smallest machine in the hedge trimmer range of Becx Machines. This hedge trimmer has two trimmer heads and has been fully re-design. Due to the limited dimensions and smaller components, both the weight is low and the required oil flow is very small. The HS75HR is therefore compatible with even the smallest of tractors. Of course, this trimmer also has all the qualities that you associate with Becx Machines.

Most popular related searches

SAFE AND RELIABLE

Becx Machines has taken safety to the next level with the HS75HR. Because the primary aim is a lightweight hedge trimmer, the hood and the frame had to be lighter. Extra safety is ensured by making the safety components of the hood
from high-strength steel, which improves damage resistance by up to four times compared to regular steel. This helps to better guarantee safety.

CAPACITY

Becx Machines hedge trimmers are able to significantly reduce the size of hedges in a single work process, without making concessions in results. Noise levels are very low because the machine only uses hydro-motors and features no chains or V-belts. No concessions have been made with the two trimmer heads of the HS75HR either.

Very safe thanks to a sealed casing made from high-strength steel
Reliable
Cost-reducing
Good trimming result
Low weight
Low noise levels
Compatible with almost all mowing arms

Working width: 77 cm
Weight: 76 kg
Trimming capacity: up to 2,0 cm
Fixing sleeve: 80 x 80 mm
Maximal rpm: 3000 rpm
Required connections: Pressure – Return – Drain lines (pressure-free)
Required oil supply: circa 24 liter / minute (featuring 8cc motor as standard)
Min. / max. oilpressure: 180 bar

Flow regulator for adjusting the volume flow.