- Home
- Companies
- Morbark, LLC
- Products
- Beever - Model M12R - Brush Chipper
Beever - Model M12R -Brush Chipper
Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Beever M12R Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access. The patented chambered air impeller system increases chip throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency. The M12R is available in a PTO unit for those who have access to a commercial tractor. Like all Morbark equipment, the M12R is a long-lasting, durable machine backed by a world-class parts and service support team.
Infeed Opening
The 60″ wide x 31″ high chute opening and 15″ wide x 12″ high throat opening allows for easy feeding of branchy material and reduced saw labor.
Drive Belt Cover
Drive belt inspection cover provides easy access for drive system maintenance.
Hydra-Lift System
The powerful Hydra-Lift dual feed wheel compression system with spring-assisted down pressure generates more than 3,300 lb./ft. of combined material pulling force.
360° Swivel Discharge
360° swivel discharge with chip deflectors puts chips right where they’re needed without removing the Beever from the tow.
Track Undercarriage: Optional
Take the chipper to the material with a two-speed, 72″ long x 9″ wide, turf-friendly rubber track undercarriage and 4.94 PSI ground pressure.
General
Chipping Capacity: 12″
Length: 15’3″ wheeled/13’9″ tracked
Height: 8’6″ wheeled/8′ tracked
Width: 6’6″ wheeled/6’3″ tracked
Gross weight: 5,200–5,500 lbs. wheeled/approximately 6,400 lbs. tracked
Suspension: 6,000 lb. torsion
Infeed opening: 60″ wide x 31″ high
Throat opening: 15″ wide x 12″ high
Drum: 14 ¼” wide x 21″ diameter
Engine: CAT, Perkins or Kubota
Horsepower: 84–114 HP
Fuel capacity (tank): 24 ½ gallons
Hydraulic oil capacity: 17 ½ gallons
Frame: 8.2 lb. 6″ channel or 2″ x 4″ tubular
Tires: (2) LT245/75Rx16″
Hitch: 2 ½” Pintle
Equipment Highlights
21″ diameter x 14 ¼” wide staggered-knife-pocket drum with two dual-edged chipper knives and Vortex chambered air impeller systems
Top and bottom horizontal feed wheels equipped with serrated teeth and knife bars
Reversing automatic feed system
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Fuel tank sight gauge, drain plug and shutoff valve
Hydraulic tank shut-off valve, drain plug and clean-out cover
Live hydraulics; ball valve, pump, motor and control valve
5″ x 3″ tubular steel telescoping drawbar with two 12″ extensions
Morthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection.
Options
- Variable speed flow control
- Folding infeed tray
- Turnbuckle for discharge height adjustment
- Winch package: heavy-duty, 5,000 lb. pull capacity with rope and 10′ chafe guard
- Aluminum diamond plate fenders
- Custom paint and logo packages
- Knife saver tool
- Engine stop on infeed
- Material pushing tool
- Discharge clean-out door on side or bottom
- Spanish and English safety decals