- Home
- Equipment
Refine by
Maidwell Agricultural Equipment & Supplies
5 equipment items found
Manufactured by:Hankins Engineering Ltd based inKelmarsh, UNITED KINGDOM
To suit lower hp crawlers or 200hp+ wheeled tractors The single leg trailed is the same design as the mounted version with shorter beams to ease pulling because of the drawbar length. The machine has a hydraulic drawbar and lifting wheels to guide the moler in and out the ground smoothly. The weight cant be transfered onto the tractor as much with a drawbar machine which is why it would need a ...
Manufactured by:Hankins Engineering Ltd based inKelmarsh, UNITED KINGDOM
2 Leg Trailed - available in 2m and 2.6m spacing. To suit 350hp+ crawlers and 400hp+ tractors. The twin leg trailed has long beams running through to the back it has a hydraulic drawbar and lifting super single wheels to guide the moler in and out the around smoothlv. Also can be used as a sinale lea if can't Dull 2 and the machine has a 3.2m transDort ...
Manufactured by:Hankins Engineering Ltd based inKelmarsh, UNITED KINGDOM
To suit 500+ crawlers. The Tri-Mole has a hydraulic drawbar and lifting wheels to guide the moler in and out the ground smoothly. This machine is 6m wide in work in which the outer wings are independantly fully floating to guide over any uneven ground. The outer wings fold up vertically to 3m for ...
Manufactured by:Hankins Engineering Ltd based inKelmarsh, UNITED KINGDOM
To suit 150 - 250hp tractors. The single leg mounted machine has long beams with four hitch hole settings for different makes of tractor, the tractor needs to be hitched in the lowest hole as possible to pull the weight down onto the tractor for grip. It also has a swing arm onto the top-link to let the moler run freely over uneven ground and alter the angle of the mole when coming to lift out of ...
Manufactured by:Hankins Engineering Ltd based inKelmarsh, UNITED KINGDOM
2 Leg Mounted - available in 2m and 2.6m spacing. To suit 300hp+ tractors and crawlers. The twin leg mounted Is based on the same principle as the single leg with the 4 hitch holes and swing arm top-link. But it runs on beams untill about a third of the lengh of the machine and then runs on wheels the back to ease pulling as no beam around the leg. Weight can be added to the front of the moler, ...