- Home
- Equipment
Refine by
Olema Agricultural Equipment & Supplies
6 equipment items found
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
The Trayfiller is a versatile filling machine, and is designed to fill a wide range of trays, and is equally at home with small plug cells or pot shuttle trays. Variable speed on the compost elevator and tray conveyor flow with minimum compost re-circulation. A double paddle compost distribution system, variable speed vibrator and spiral finishing brush ensure an even fill. Quick to adjust ...
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
Specifications:: Lifting basket width: 35cm, 45cm, (40hp tractor). Lifting basket width: 55cm, 65cm or 75cm, (70hp tractor). P.T.O or Hydraulic ...
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
The Bulk Bin is a purpose built unit designed mainly for the handling of bulk bags of compost. Loose compost is also easily managed with the help of a front loading tractor no more shovelling. Once the hopper is loaded the unit can be started by either an on/off switch, foot switch or a compost sensor to start the chain and flight conveyer and so load your potting bench or potting machine with ...
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
For lifting leeks, radishes, parsnips, nursery tree seedlings etc., an adjustable vibrating bar reduces draft and increases soil agitation. The bar oscillates from the centre. The Flat bar undercutter is a simple robust machine that works well under poor conditions, including wet ground and very dry, hard ground. It leaves the crop standing in the ground in much the same position as before ...
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
The Plastic Hole cutting machine is designed to save time on marking out and cutting out plastic sheeting.It is more precise than hand cutting in ensuring spaces are even, and gives a clean cut without leaving loose flaps which are vulnerable to being caught by the wind. The angled wheels run along the sides of the raised bed to keep the machine level and square and to prevent misses, whilst the ...
Manufactured by:Olema Engineering Ltd based inDunsfold, UNITED KINGDOM
This tractor mounted machine is capable of planting any trees or whips etc that will go into a 3” – 9” groove. The planter also leaves the young trees or whips standing straight and well firmed in, thus minimising heeling in after planting. This is a robust machine, designed to last and ...