- Home
- Equipment
Refine by
Bema Agricultural Equipment & Supplies
13 equipment items found
Manufactured by:bema GmbH Maschinenfabrik based inVoltlage-Weese, GERMANY
Convincing in winter service: The middle blade in six working widths. bema snow ploughs were developed for use on a wide variety of carrier vehicles. Through optimum adaptation to the ground, low-wear polyurethane clearing blades ensure that the snow is cleared without damaging the pavement. The stability of the snow plouhs is achieved by lateral and upper edges on the body of the plough. The ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Tanks Ø1830x5000 mm for the fish industry: Manufactured in AISI-304, 1.4301. Outer diameter: 1830 mm.. Flights with holes so the water can pass through. Flights manufacured like a meccano system. The tanks are parts of complete processing system for salmon processing. All parts acid pickled after welding. Manufactured according to food ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Screw conveyor with built-in hopper for feeding pulp into ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Screw shaft for meat mincer: Manufactured for the food industry. Outer diameter: 250 mm. The cuttting flight has a pitch of app. 1100 mm. Very long pitch/diameter ration. Manufactured in stainless steel 1.4301/AISI-304. The complete shaft is grinded and sand blasted ready for installation in the ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
BEMA has undertaken to make complete drawings and delivered a complete solution with machines and documentation – all ready for installtion ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Ordinary screw-conveyor flights for all kinds of conveyance, compacting, dosage, etc. Screw flights are produced by cold-forming, ensuring a reliable, accurate result with maximum strength relative to the choice of material and the specific usage of the screw flight. We have developed a proven production technology, enabling us to produce screw flights capable of compensating for deviations ...
Manufactured by:bema GmbH Maschinenfabrik based inVoltlage-Weese, GERMANY
Effective through area efficiency. Equipping a sweeper for weed removal. bema offers a wide range of sweeping equipment that can be used all year round for a variety of applications. Depending on the carrier vehicle performance, the main brush can be exchanged, so that the sweeper can be used both for sweeping dirt or snow in winter and for removing weeds. For this purpose, the bema Weed brush ...
Manufactured by:bema GmbH Maschinenfabrik based inVoltlage-Weese, GERMANY
Relentlessly against snow: The large blade with maximum clearance performance. bema snow ploughs were developed for use on a wide variety of carrier vehicles. Through optimum adaptation to the ground, low-wear polyurethane clearing blades ensure that the snow is cleared without damaging the pavement. The stability of the snow plouhs is achieved by lateral and upper edges on the body of the ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Bin with double screw and mixer screw in the top of the bin. Design for the food industry. Combines the following functions: Storage, Transport, Mixing. The bin delivers to a food pump (not part of the delivery). Outer diameter of double screws: 275 mm. Diameter of mixing screw: 985 mm. Manufactured according to food standards. Supplied including a mounting frame and a wheel station for the pump ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Cooker/blancher for Ø800x6000 mm pre-cooking of cabbage: Retention time 8 minutes. Manufactured in AISI-304, 1.4301. Outer diameter: 800 mm. Pitch 425 mm. Flights with cutted holes for easier cleaning. Lit and bottom are insulated with a stainless steel cap. The lit is filled with insulation that are closed with a 100% welding. All parts in contact with food are manufactured in 2B surface. ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Screw conveyor with bin for pet food: Design for the food industry. Manufactured in AISI-304, 1.4301. Outer diameter: 4000 mm. All inner surfaces grinded, acid pickled and glass blasted. Manufactured according to food standards. Supplied including a mounting frame. ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
Lifting screw with inlet hopper. Lids with hatches. Complete delivery from BEMA. Designed to meet the demands in the food industry.Easy asscess to all parts for cleaning the screw ...
Manufactured by:Bema A/S based inHaderslev, DENMARK
7691 – Feeding screw with bin. Features: Inkl. support with wheels. Flights in HARDOX (wear resistant). End outlet Double bearing at drive end to support the screw rotor. Housing manufactured in carbon ...