- Home
- Equipment
Refine by
Csi Agricultural Equipment & Supplies
14 equipment items found
Manufactured by:Çukurova Silo based inSarıçam, TURKEY
ÇSÄ° dryers are built tough with the most modern features available for high performance and simplified operation. All of our units feature G115 galvanized, ribbed, and perforated sidewalls with solid 16-gauge column dividers every two feet. (Stainless steel perforated outside wall sheets along with stainless steel nuts, bolts and washers are also available.) ÇSÄ° ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
This 4-knife pull-thru delimber comes equipped with an integrated topping saw. It is suited for use in hardwood or pine. The 72' wide throat opening, a special roller, and our unique knife design makes delimbing trees smooth and easy. It comes mounted on a cradle constructed of high alloy steel. We also use top quality rotation bearings, pivot bushings, and rollers. Its ease of operation yields ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The model 6500 Power Unit provides an alternative hydraulic power source for slasher saws used in applications where the need for loader mobility prevents the slasher from being connected in a conventional manner. In most cases, the remote transmitter is wired to switches in the joystick handle allowing seamless operation of the loader and slasher. The remote sending unit can be easily moved from ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
Our PTD-264-NTS is designed with the same rugged features and quality as our PTD-264, without the integrated topping saw for operators who do not require that ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The DT - 2500 Delimber Trailer was designed with mobility and flexibility in mind. Made with a single heavy-weight I-beam rail, the DT-2500 offers easy towability to and from the jobsite, and allows the operator to position it exactly where required for optimal production. The DT-2500 also features a heavy-duty 22,000 lb axle and 1100-22.5-12ply tires. The DT-2500 is equipped with highway ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The IDT-2800 is a self-contained power unit including a diesel engine, hydraulic power pack, and radio remote which allows you to run our delimbers without attachment to loader ...
Manufactured by:Çukurova Silo based inSarıçam, TURKEY
CSI ventilation grids are used are placed on the ventilation channels of the silo floor. By the structure of the grids and bottom supports, thousands of grains are ventilated safely. Ventilation is available through the holes on the grids by the air coming from the fans. Size of the holes are determined according to the type of the grain. This determination is important to prevent the grains go ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The model DFH-3526 is a grapple felling saw head designed for use on excavator-type carriers. The saw head incorporates a dangle hook-up system, and features bar and chain cutting technology. Expertly designed, and built from the finest alloy steel, our saw head is rugged and robust enough to withstand the daily punishment of a logging operation. The DFH-3526 is equipped with a 3/4 pitch chain, ...
Manufactured by:Çukurova Silo based inSarıçam, TURKEY
The angles of the bottom of the hopper bottom silos are 45 and 60 degrees. These angles produce easier flow of the grain. However, 45 degree bottoms are used to store grains, 60 degree bottoms are used for animal feed, humid grains or low viscosity ...
Manufactured by:Çukurova Silo based inSarıçam, TURKEY
ÇSİ silo wall sheets have a minimum tensile strength of 900,000 kgf / cm2 (63,200 Psi). These values clearly demonstrate our superiority against other silos in the market. ÇSİ; offers strong, fit for purpose and durable commercial steel silos. Steel sheets made of very durable steel, wide corrugation spacings, heavy galvanized steel silo posts and suitable roof gutters are ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
This 3-knife pull-thru delimber features a 20' throat opening. It is designed for less productive contractors harvesting pine and hardwood using smaller knuckle boom loaders. Available with or without a topping ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The DT - 2600 Delimber Trailer has same rugged features and mobility as the DT-2500 Delimber Trailer, but with heavy-weight dual channel construction. This allows you to carry one of our slasher saws on the trailer chassis during transport. The DT-2600 is also equipped with highway lighting and a fixed front spade, and is available with your choice of PTD-143, PTD-243, PTD-264, or PTD-264-NTS ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The DL-4400 has what CSI calls a DOG LEG (DL) style saw box which gives the loader operator a better view plus more grapple room when pulling the tree stems up for the next cut. It is built from high strength tube and alloy steel by skilled workers to create a machine that is strong and durable. New innovations such as four larger 3/4 inch bar mounting bolts and a hydraulic cushion bar stop help ...
Manufactured by:Cutting Systems, Inc. (CSI) based inUnion Grove, NORTH CAROLINA (USA)
The CSI Model DL-4400-R Revolver features a saw box that rotates to accomodate a left or right handed load operation. This allows the operator to orient the saw box in either position quicker and easier. The DL-4400-R also features a redesigned chassis construction to help keep the stems flat for smooth, clean cuts on uneven ground. As with our other saws, the Revolver is built from hi-alloy ...