- Home
- Equipment
Refine by
Gutzwiller Agricultural Equipment & Supplies
8 equipment items found
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The LRG series of widths 2.75 and 4 m are machines used for smoothing and adjusting of materials, guided by a laser system. LRG graders have a sober and robust design; the blade body is of monobloc type. This manufacturing principle ensure stiffness and hence accurate and efficient grading ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The front-end grader represents the highest performance accessory for smoothing and adjusting of materials, guided by a laser or GPS ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The public works specific version with a reinforced chassis, 5 blades and 7 interchangeable teeth is intended for deep scarification to track and road for tractors having a power of at least 100 ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The MJ is designed for a working width of 1.40 to 2.30 m (depending on the model). It is equipped with single or double transmission via a double chain, dependent on the tractor power and a rear roller. The 1.40 m machines are ideal for micro-tractors. The MJ-STH shredder is a derivation of the MJ with a hydraulic drive and a fast coupling depending on the carrier engine, ideally for the skidder ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The MJS type is a machine with a working width of 1 m to 2.5 m equipped with a triplex chain transmission (model MJS-DT) or a cascade pinion transmission (MJS-TG). This characteristic makes the machine ideal for medium to high power ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
The MJH type is a machine of width 1.2 m to 2.8 m. This machine was designed for high power tractors and for work at a depth of 35 cm. It is equipped with a dual transmission with cascade pinion gearing and a unique design overload ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
Our blades can operate in a frontal position. The blade body pivots by a half-turn. The blade profile and the cutting angle are designed to work on all types of soil. The LN250 series is intended for fine and heavy adjustments, for 50 to 150 HP tractors. The set of angular adjustments (inclination, drift and rake) are made using a hydraulic cylinder controlled directly from the tractor. An ...
Manufactured by:D. Gutzwiller SAS based inLucelle, FRANCE
Vibrating plates can be fitted to the front or rear of a tractor, on a loader, a hydraulic shovel, a grader or a compactor. The independent mounting of the pads so that they are free to move means they can be adapted to the profile of the surface to be compacted. As an option the system can be mounted on a chassis of 350 mm on each side. The vibrating plates ensure dynamic compacting up to 50 cm ...