Hendrickson Agricultural Industry Equipment
-
Manufactured by Hendrickson Bros.based in USA
The PGS Rotor is specifically designed for use in agriculture, greenhouse, nursery and landscape. The PGS Rotor is produced using the highest quality materials. Consistency and quality are our number one concern. Quality assurance for overall excellence, performance and durability are ongoing at Hendrickson ...
-
Manufactured by Hendrickson Bros.based in USA
The J10 Hose Bibb Vacuum Breaker prevents backsiphonage through the exterior hose bibb connection. Back-siphonage can occur whenever a negative line pressure (vacuum or partial vacuum) is present that causes the reversal of the normal line flow. The use of the J-10 Hose Bibb Vacuum Breaker greatly reduces the possibility of backsiphonage and protects the potable water supply from contaminants ...
-
Manufactured by Hendrickson Bros.based in USA
The PR5500 offers exceptional outlet pressure control to provide consistent performance from 20 to 720 gallons per hour. The PR5500 offers the widest operation range available. The PR5500 effectively regulates at the following pressures: 10, 15, 20, 25, 30, 35, and 50 PSI, all preset to exacting factory ...
-
Manufactured by Hendrickson Bros.based in USA
The FLD500 Break Away Flow Limiting Device is designed with an internal flow control to substantially reduce the amount of water loss in the event of a sprinkler riser breakage. The irrigation system remains operational and balanced even in the event of multiple breaks in the system. The FLD500 can be easily removed and replaced quickly to minimize system down time, water loss and maintenance ...
-
Manufactured by Hendrickson Bros.based in USA
The DG41 is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices. Constructed of high-strength ABS plastic the DG41 resists corrosion for increased reliability and long-life. Laboratory tested and industry approved since ...
-
Manufactured by Hendrickson Bros.based in USA
The new PRC4500 Series Preset Pressure Regulator is a 1/2” low flow pressure regulator with a built in check valve. It will prevent line drainage from causing unwanted erosion and water puddles. This regulator works by remaining closed with no flow until the check valve opens. After opening, the sprinkler or watering system will operate at the selected preset pressure. Upon system shut ...
-
Manufactured by Hendrickson Bros.based in USA
These caps put out a stream pattern and are available in 4 patterns for different watering ...
-
Manufactured by Hendrickson Bros.based in USA
The PR25-9 is a 9 outlet pressure regulating drip manifold. The PR25-9 can be installed on any 1/2" riser or fitting and easily converts traditional spray systems to drip, micro spray,or micro stream bubblers. Separate pressure regulation is not necessary since each PR25-9 automatically reduces inlet pressure. Ideal for planters, patios, or other areas with shrubs, trees or ground covers; the ...
-
Manufactured by Hendrickson Bros.based in USA
Details: This handy little attachment will allow you to shut off the water to the sprinkler, allowing you to work on the sprinkler and then restart it when you are ready. A couple of turns unscrewing of the sprinkler will activate the valve. To restart the sprinkler, you just turn the sprinkler to ...
-
Manufactured by Hendrickson Bros.based in USA
A proven preset pressure regulator designed specifically for low flow drip irrigation applications, in 6 popular ...
-
Manufactured by Hendrickson Bros.based in USA
The PR8000 PRESET PRESSURE REGULATOR is a high flow regulator that has a range of 1 to 35 gpm. This regulator has been designed to convert high pressure to the desired pressure. The PR8000 is specifically designed for use in high flow applications such as agriculture, greenhouse, nursery and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you