Wear parts in hardened steel boron. Easy assembly with tractor three-point linkage. Needle bearing hydraulic flanging. Adjustment of working angle. Lateral levelling of different mesh gauges. Vertical levelling of joint pieces. Reversible shares in silico-manganese steel. Scrapers adjustment. Tube frames.
Hydraulic 3, 4 and 5 discs plough. Structural tube frame. Easy assembly with tractor 3-point linkage. Protection Guard of the flange hubs. Furrow wheel adjustable in height and tilt. 600 mm spacing between discs. Regulation of the horizontal angle of attack (keeping the working width) - 4 and 5 discs models.
Offset harrows ('V' type), mounted; Tie rod with adjustable length; Adjustable disc scrapers; Lubricated bearings; Rotary steel shaft: 28 mm square; Plain discs / cut-away; 230 mm space between discs; Automatic coupling on models (HRM 18 and HRM 22).
Differential on top Lateral transmission by gears Main Features: Knifes shaft allows disassembling;. Bearings protection. Rear hood with two springs. PTO shaft protected with clutch or fuse (C.E. mark). Parking support. Safety protections according with EU regulations. PTO - 540 r.p.m.
Knives grouped two by two. Skids in anti-wear out steel. Dismountable blade shaft. Central pinion with two supports. Double Support. System for sealing bearings 'Face sealing'. PTO shaft protected with clutch. Support PTO shaft. Possibility to operate with two rear hood. Interior reinforcement cover sheet anti wear.
Knives shaft allows disassembling; 4 or 6-knife per disc; Rear hood with two springs; PTO shaft protected with fuse screw (CE mark); Bearings protection; Parking support; Safety protections according with EU regulations; PTO - 540 r.p.m.
Mouldboards with reversible chisel. Wear parts in hardened boron steel. Highly resistant steel shafts. Articulation on brass parts. Adjustable working angle. Replaceable heel adjustabel in height. Hydraulic reversing cylinder (H1F 90H) with a safety valve (automatic in M versions). Adjustable Scrapers.
Tubular Chasis. Independent discs Body. Plain Discs of 26'' (660mm) or 28'' (710mm). 3 angles of incidence: 0 degrees, 7.5 degrees and 15 degrees. 5 cutting angles: 35º degrees, 40º degrees, 45º degrees, 50º degrees and 55º degrees. Possible to adjust the distance between the feet of the discs in the chassis of the ridging ...
Offset harrows ('V' type), trailed; Front indented discs and rear plain discs; Hydraulic-adjusted working angle; Self-lubricated bearing; Stand-contained disc gangs; Adjustable disc scrapers; Adjustable dawbar for traction /transport; Disc shafts made of square 40 mm steel; 260 mm spacing between discs; Wheels 10.0/75-15.3; Rear electric lighting.
Offset harrow (“V” type); Front indented discs and rear plain discs thickness 6mm or 8mm; Hyd. adjustable working angle of discs; Lubricated bearings; Adjustable disc scrapers; Tie rod with adjustable double spring; Wheel-gear operated by hyd. cylinder; Structural tube frames; Rotary steel shaft 40 mm square; 235 mm spacing between ...
Mouldboard with reversible chisel. Wear parts in hardened boron steel. Highly resistant steel shafts. Articulation on brass parts. Adjustable working angle. Replaceable heel adjustable in height. Hydraulic reversing cylinder with a safety valve.
Eccentric turning drawbar; Hydr. Opening/closing with adjustment of disc attack angle; Wheel-gear operated by hydr. cyl.; Structural tube frames (250 x 100 x 8 mm (22 to 32 disc) and 250 x 100 x 10 mm (34 to 36 discs)); Sequential system of disc gangs opening/closing; Rotary steel shaft 40 mm square; 260 mm spacing between discs; Adjustable disc ...