Holland Agricultural Industry Equipment
-
Manufactured by Holland Transplanter Companybased in USA
Holland's 2-1/4" solid diamond shaped toolbar is available in 6 foot or 8 foot lengths. They are the recommended arrangements for use with 2 conventional units, which would not be needing fertilizer attachments. They include a CAT 1 or CAT II welded three point ...
-
Manufactured by Holland Transplanter Companybased in USA
The 1265 is designed to plant through the laid plastic mulch without leaving the plastic torn or full of holes. The operators drop the seedlings into the revolving spades, the planter does the rest. The spade pops a hole through the plastic and into the ground, sets the plant into the hole, gives it a shot of water, and repacks the soil around it. This is the easiest and best way to set your ...
-
Manufactured by Holland Transplanter Companybased in USA
When equipped with a 3 point hitch and 55 gallon barrel, the Model 1500 is the most economical and versatile single row planter ...
-
Manufactured by Holland Transplanter Companybased in USA
The large front wheel drive tire eliminates sliding in dry, sandy and loose soil conditions by using the front wheel to power the ...
-
Manufactured by Holland Transplanter Companybased in USA
Model 1600 can be mounted on any type tool bar for three point mounted multi row planting arrangements where fertilizer attachments are not being ...
-
Manufactured by Holland Transplanter Companybased in USA
The 1295 Mulch Digger eliminates the back-breaking job of digging the edges of the plastic out of the field at the end of the season. This heavily built digger will straddle the plastic, cutting the sod outside the edges, and lift those edges out of the soil, laying the plastic in one loose piece on top of the ground. An optional center mounted coulter blade can be added to slice the ...
-
Manufactured by Holland Transplanter Companybased in USA
Available with or without fertilizer attachment. The 1275 can lay 48″ plastic* without tearing, on flat ground or beds. The unit floats independent of its three-point hitch, ensuring a smooth application. By adding the fertilizer and drip irrigation attachments, you can reduce your expenses and still maximize your ...
-
Manufactured by Holland Transplanter Companybased in USA
Our 4″ x 4″ or 4″ x 7″ Tool Bars are available in lengths up to 24′ and are the suggested choice for growers who prefer a tractor mounted setup. When equipped with our bolt-on CAT II three point hitch, these toolbars make a strong yet versatile setup. They give ample support for carrying the planting units plus fertilizer ...
-
Manufactured by Holland Transplanter Companybased in USA
For planting greenhouse tray plug plants, our rotary planting unit is number one in its field. That’s why we call it the Rotary One. With only one operator, this efficient machine will plant more than 60 plants per minute. After an initial setting is made to fit your desired depth and plant spacing, plants are dropped into the rotating cups and the planter does the rest. Spacing and plant ...
-
Manufactured by Holland Transplanter Companybased in USA
Our Model 1302HC Main Frame is ideal for mounting two rotary or conventional planter units as a tractor drawn two row transplanter. It can be purchased with an optional 300 gallon water barrel and/or a fertilizer attachment with a capacity of up to 400 pounds of granular fertilizer. To give plenty of clearance at row ends, hydraulics will raise the entire frame (including all planters and ...
-
Manufactured by Holland Transplanter Companybased in USA
For larger acreage the Model 1304HC Main Frame is a rugged tractor drawn model. It is made to hold three or four Rotary One or conventional planting units, and can carry two optional 300 gallon water barrels as well as 800 pounds of fertilizer in the optional fertilizer attachments. Like the 1302HC it can also be raised at the end of each row, to give clearance during turning. Uses 11 x ...
-
Manufactured by Holland Transplanter Companybased in USA
In one pass, (with the optional irrigation attachment), the 1235 will: Shape the bed. Lay the irrigation tape. Lay the mulch. Large bed forming plates are adjustable, are lined with a polymer coating to resist soil build up during ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you