Rolmako Agricultural Industry Equipment
-
Manufactured by Rolmakobased in POLAND
The disc harrow’s main purpose is to scarify and crumble the soil. It has a wide range of uses – it can be employed for mixing lime, mineral fertilizers, manure or stubble with the soil. The machine can effectively replace ploughing. The disc harrow scarifies, crumbles and breaks apart the soil layer. The discs are made out of high quality boric steel. The working elements of the ...
-
Manufactured by Rolmakobased in POLAND
U 645 is a harrow manufactured with purpose to work in the vineyards and gadens. Light and compact design are its most important characteristics that allow using the machine wherever there is no place to maneuver and work with larger units. The construction base was compact disc harrow (U 693) but its design has been adjusted in hitch category and size in order to cooperate most effectively with ...
-
Manufactured by Rolmakobased in POLAND
The U 453 skimming cultivator is mounted onto 3 - point tractor suspension system. In two rows, there are rigid tines fixed to the cultivator's frame, which cut and mixes the crop residue. The rolling coulters and the string roller allow crushing and levelling the soil layers. The cultivator's frame is constructed with the use of shapes and flat bars; however the string roller is made from flat ...
-
Manufactured by Rolmakobased in POLAND
U 497 universal crop cultivator is widely used in the soil cultivation. It is a tillage and stubble machine, which, if necessary, is a 100% cultivator for pre-sowing cultivation, and, if necessary , a fully-functional stubble cultivator . The four-beam cultivator with a strong operating unit equipped with SW tines 70x12 mm will operate perfectly on light, medium and heavy soil. The properly long ...
-
Manufactured by Rolmakobased in POLAND
The U 652 disc harrow is a universal machine for pre-sowing and stubble cultivation. The machine is available in two types of overload protection, the customer may choose 40x180 mm rubber or 3D shock absorption with a 35 x 35 mm spring. The machine is equipped with OFAS 560 mm discs, maintenance-free hubs and hydraulic depth adjustment. The distance between the rear and the front beam of 90 cm ...
-
Manufactured by Rolmakobased in POLAND
The Rolmako seedbed cultivator should be used on light and medium-compact soils. The machine is adjusted to work with a seeder. The purpose of the entire set is to perform both pre-sowing cultivation and sowing in a single pass. The unit is equipped with a universal latching axle, which makes latching easier on the lower ties of the tractor. The seedbed cultivator comes in three working widths: ...
-
Manufactured by Rolmakobased in POLAND
Rolmako snow plough is a heavy-class plough designed to work with an agricultural tractor equipped with front TPH. It is used for public roads clearing, parking places and all paved and unpaved road surfaces. The plough is also very useful in forming the silage piles and prisms, pushing aside (e.g. manure). It is able to carry loads up to 12,5 ...
-
Manufactured by Rolmakobased in POLAND
U 638 subsoiler is another proposal from Rolmako for universal tillage machine used for soil treatment early autumn and in the spring after stubble cultivation that includes proper soil areation and regeneration. U 638 is cultivator dedicated to the needs of modern agriculture, it accompanies farmer in work related to the complex preparation of the seedbed. The machine comes in standard with ...
-
Manufactured by Rolmakobased in POLAND
Light disc harrow is dedicated to small and middle farms where low-power tractors are available. An important feature of the machine is short and not tall construction. A disc harrow is distinguished by the discs mounted on the vibrating springs which are dedicated to light and medium soils. The machine copies a field's surface very good and intensively mixes the soil with a crop residues. The ...
-
Manufactured by Rolmakobased in POLAND
Seedbed cultivator U 382 is designed for a seedbed tillage. It is used for loosening the topsoil, breaking and crushing the lumps of crusted soil on field and compacting the ground to improve water infiltration. The unit is useful particulary for the crops that require level field surface. Small and compact construction of the machine results in its center of gravity in the optimal position, ...
-
Manufactured by Rolmakobased in POLAND
The ProCut knife roller is a tandem type device consisting of two cutting rotors with a diameter of Ø 375 mm. At a 3.0 m width of the roller, 6 rows of obliquely arranged knives divided into 5 segments. The aggressively operating roller is protected against damage by four sections of rubber shock absorbers with a diameter of Ø 50 mm. The oblique arrangement of knives provides the even ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you