- Home
- Equipment
Refine by
Shanks Agricultural Equipment & Supplies
16 equipment items found
Manufactured by:Great Northern Equipment Distributing, Inc. (Dosko) based inRogers, MINNESOTA (USA)
Square shank, 2-1/2" stump grinder tooth with lock ...
Manufactured by:F.P. Bourgault Tillage Tools Ltd. based inSt. Brieux, SASKATCHEWAN (CANADA)
Fits all Bourgault and Ezee-On field cultivators, air seeders and air drills. 1-3/4” (45 mm) center to center. 1/2” (12 mm) hex head ...
Manufactured by:Atom-Jet Industries Agriculture based inBrandon, MANITOBA (CANADA)
Our single shoot openers were designed with the concept of zero till in mind. The distinctive vertical design improved moisture conservation, increased trash clearance, eliminated plugging, and was fully protected by the first carbides in the opener industry. The full carbide, hard-surfaced 1″ point provides a longer wearing ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The C-Shaped Necropsy Table is fabricated completely out of stainless steel. The top is equipped with a cutout area formed in the center of one long side to allow for closer access to the animal during necropsy. It also has one drain hole and a raised edge to control fluid drainage. The table has scissor-action lift design and is equipped with 2-way tilt capability. The table is completely mobile ...
Manufactured by:Dutch Openers based inPilot Butte, SASKATCHEWAN (CANADA)
Dutch has grown from Pieter Cruson’s old blacksmith shop, using hammer and anvil, to today’s high technology world using lasers to cut steel, ensuring accuracy for every product. The Dutch Twisted Shank Series offers a lower upfront cost compared to any other series from Dutch, perfect where low soil disturbance is ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
TheShank’s B.P. 360° Hydraulic Chute is equipped with a self -contained hydraulic system equipped with a 2HP motor. This system includes a worm gear reducer to assure safe and even hydraulic functions. The basic system has three hydraulic functions: hydraulic headgate, hydraulic rollover and hydraulic top squeeze. An optional hydraulic bottom squeeze is available. The Hydraulic Chute is ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Modified Portable Floor Model Surgery Table is on casters and completely mobile within a clinic environment. It is the least expensive mobile surgery table in our product line. It has a self-contained hydraulic system and merely requires a drop cord for access to power. This table is limited to one hydraulic function – raising and lowering and is always on the ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Shank’s Colon Bucket is a specialty item designed to be used during colic surgery. It is fabricated completely out of stainless steel and is equipped with stainless steel swivel/lock casters. The Colon Bucket has a removable stainless steel mesh basket to aid in straining and removal of debris from the colon. It includes a mounted drain fitting, accompanying locking valve and 10 foot ...
Manufactured by:Atom-Jet Industries Agriculture based inBrandon, MANITOBA (CANADA)
The 3″ paired row granular provides a firm, even seedbed for seed and fertilizer. The granular and seed are left on a firm seedbed all on the same plane. This prevents the seed from burning by rolling into the fertilizer trench. The paired row will give you two distinct seed rows with the fertilizer down the center. This opener can be used for wider row spacing machines with a 3.5″ or ...
Manufactured by:Bigham Brothers, Inc. based inLubbock, TEXAS (USA)
The Bigham Stiff Shank Cultivator is a simple, durable weeding tool, suitable for a variety of row crop patterns. The simple component design lets you set standards to virtually any spacing. All components are constructed and assembled to perform under the harshest conditions. A wide selection of optional attachments combine easily with the standard equipment giving you the freedom to create the ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
Shank’s Cage/Kennel mats are traditionally between 2″ and 4″ thick and are made to size. The pads are comprised of a 2.2 lb. density polyurethane foam that is covered with vinyl coated polyester material, to provide a water resistant ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Shank’s® CT Platform Table (“Table”) was introduced in 2019 and is designed for support of standing large animals in conjunction with CT scanning. The Table has a 60″ x 96″ Platform Top with an affixed stock and is designed to be placed in a recessed pit adjacent to the CT machine. ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Shank’s Foal Couch is a specialty pad designed for support of a recumbent foal. The pad is made with a 22 oz. vinyl covering, and has 6″ (15cm) thick side walls and a 10″ (25cm) thick floor. The cutout area to support the foal is 34″ deep x 48″ wide (86cm x ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
TheShank’s® B.P. 360 Manual/Electric Chute is equipped with a gearmotor electric rollover, a hand pump top squeeze, a manual headgate and a manual chain/ladder tailgate. The Manual/Electric Chute is available in one size – Regular. ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Dorsal/Lateral Cylinder Base Equine Tableis equipped with 4-way tilt capability. The hydraulic system includes a total of eight hydraulic cylinders that work individually and in pairs, to provide this versatile 4-way tilt capability. This model can achieve Trendelenburg positioning via hydraulics. The table can be put in a stationary position by extending the four lower cylinders, and ...
Manufactured by:Shank’s Veterinary Equipment Inc. based inMilledgeville, ILLINOIS (USA)
The Dorsal/Lateral Scissor Base Equine Table was introduced in 1990 and combines the scissor-type lifting concept of the original Floor Model Surgery Table with the multi-section table top originally introduced on the Cylinder Base. The Scissor Base is able to achieve a reduced lower height for added versatility to the end ...