Weidemann - Model T4512 - Compact Telehandler

All these factors have contributed to more than 10 years of success of our T4512 on the market - and now we’re taking things up a gear: Converting the engine of the telehandler T4512 to comply with exhaust emission stage V has meant a full redesign of this successful machine. You can now look forward to new product features that will make your everyday work even easier!

Auto mode: Ensures the usual 100% performance of the machine.

Eco mode: Once the vehicle has reached the desired speed, the engine speed reduces to 2200 rpm, thus reducing noise and saving fuel.

The two other optional drive modes are designed specifically for use by hydraulically-driven attachments or for the optimised execution of the Y-loading cycle:

Attachment mode: This mode provides perfect support for the use of attachments. In this mode, the manual throttle is used to set the diesel engine’s rpm, with the driving speed being controlled by the drive pedal or speed control unit. These features enable speeds to be finely set at increments of 0.10 km/h via the display. This ensures a constant feed for the attachment. If the load on the attachment is too great (e.g. various clippings in front of a mulcher), the machine automatically reduces the speed to ensure that the attachment functions with the highest possible performance. Once the load is removed, the machine can be switched back to its pre-set speed. This is done using a speed control unit. However, if you want to drive forward or reverse more quickly, you can override the unit at any time by engaging the foot pedal to accelerate the machine, even to its maximum speed, if required.

M-drive mode: This mode is ideal for optimising the execution of Y-loading cycles. In this mode, the manual throttle is used to set the diesel engine’s rpm, with the driving speed or control pressure being controlled by the drive pedal. This means there is no longer any need for inching, thus greatly supporting the execution of fast Y-load cycles.

Electric parking brake

The new electric handbrake features an auto-hold as well as a hill-hold function. The brake engages automatically when the machine comes to a halt, when moved into neutral or when the operator leaves the cab. The electric handbrake is released automatically when the machine is set in motion using the accelerator. Naturally, the brake can also be engaged or released manually using the switch. Enhanced comfort and security for the operator.

All-wheel steering, low centre of gravity and excellent stability
Thanks to the all-wheel steering and the undivided frame, Weidemann telehandlers are particularly manoeuvrable and very stable. The low centre of gravity of the machine further enhances its stability.

High quality powder coating
Quality creates added value. The powder coating is a key feature of the Weidemann quality standard. In contrast to the conventional wet painting, it greatly increases the service life and is more efficient and also environmentally friendly in the process. Learn more about powder coating here »

Driver assistance system vls (Vertical Lift System)
The VLS (Vertical Lift System) enables a fluid working principle and, through a partially automated telescoping movement, facilitates working in a complex operating environment. The near-vertical lifting or lowering movement of the machine improves its stability. The vls has proven itself well in the area of agriculture and our innovation has received several international awards. Learn more about the vls here »

Sturdy telescopic arm and enormous lifting height
The telescopic arm is designed to be sturdy and stable and is placed in the centre of the machine, which causes little distortion. Parallel guidance is hydraulic. The sliding components in the inner tube of the telescopic arm require no maintenance. All important hydraulic lines are ideally protected against external influences. With our compact Weidemann telehandlers, you reach amazing lifting heights with the best stability and compact dimensions.

Equipment variety
Weidemann telehandlers feature comprehensive and sturdy standard equipment. Depending on the application, the engine, drive, hydraulics or tyres can be individually configured. Your Weidemann is always custom-made.

High pushing power from the planetary axle
The drive via the planetary axle increases the torque on the wheel, thereby improving pushing power. Due to the optimal ratio between the pushing power and machine capacity, work is both flexible and economical.

100% differential lock
The connectible 100% differential lock provides maximum traction and thrusting force if necessary. It also minimises wear on tyres (switched off during normal operation).

Large selection of tyres
The optimal tyre to suit any type of surface – that is what we offer! We have a wide selection of different tyres available for your Weidemann. Which tyres are right for your machine? Find out here »

Large selection of attachments
A multi-tool for various applications Whether loading, stacking, pushing, sweeping, mowing or transporting material: Our huge range of different attachments transforms your Weidemann into a universal multi-tool. We have a wide selection of different attachments available for your machine. Which attachment and what size do you need for your machine? Find out here »
Compact design, compact dimensions

Compact dimensions in the 2 x 2 metre class
The width and height of all compact Weidemann telehandlers is less than 2 metres. This is also what makes them ideal for use in confined areas - their combination of lifting height, width and machine capacity makes them unique.

Small inner radius
All telehandlers in our compact series have particularly small inner radii. The manoeuvrability this achieves is what makes these machines all-rounders, wherever they are used.

Good all-round view
The operator’s central seating position and the fully glazed cab with its deep-drawn windows ensure excellent all-round visibility over the entire working area.

Easy to transport
The Weidemann telehandler T4512 can easily be transported on a trailer. This gives machines the versatility to be moved around quickly from job to job.