- Home
- Companies
- Technion Oy
- Products
- Technion - Model TEC122 - Extension ...
Technion - Model TEC122 -Extension Module for Interfacing with Sensors and Joysticks
TEC122 is a cost-effective extension module for interfacing with different kinds of sensors, joysticks and buttons. Thanks to its fully independent and redundant reference voltage outputs, you will be able to gain the highest reliability for your joystick-controlled machine movements. All the I/O pins and communication ports are protected against short circuits and electrical disturbances in vehicular environments. TEC122 is at its best when it is used as a slave controller in a distributed system. Cabling costs can be optimized and it is easy to implement communication with the master module over a CAN bus.
CPU: 32-bit architecture, 65DMIPS processing capacity
Memory: Flash 512kB, for CODESYS application 224kB
Data EEPROM 64kB, for CODESYS application 63kB
RAM 96kB, for CODESYS application 16kB
Supply voltage range: 9V – 32V (overvoltage rating: 36V operational)
Supply current, logic: 0.15A
Supply current, outputs: 20A (maximum)
Housing: Glass Fiber Reinforced PA, electroplated steel
152mm x 152mm x 59mm (W x L x H)
Protection: IP67
Temperature range, operating: -40°C … +75°C
Temperature range, storage: -40°C … +85°C
Connectors: TYCO AMPSEAL 35 positions (1pcs),
TYCO AMPSEAL 14 positions (1pcs),
M12A-coded (1pcs) in RS485 option
CAN x 2pcs: ISO 11898-2
Serial: RS-232, RS-485
Electrical requirements: ISO 16750-2
Mechanical requirements: ISO 16750-3
Climate requirements: ISO 16750-4
Automotive EMC directive: UNECE regulation No.10
Construction machinery - EMC: EN 13309:2010
Agricultural and forestry machinery - EMC: EN ISO 14982:2009
Earth-moving machinery - EMC: ISO 13766:2006
Application development environment: CODESYS V2.3