Fishmatik - Fiberglass Pool for Fish Farming in the Ultrasound
Pools for growing fish are made of fiberglass and are a seamless design without seams. The rigidity of the design of the pools is ensured by the selection of the thickness of the walls of the pools. Fiberglass pools are equipped with outlets for docking with PVC pipes and additional fittings.
The shape of the fiberglass pools was designed in such a way as to maximize the use of the surface intended for fish farming and to prevent the formation of dead zones even with minimal water flow. All types of pools have the property of self-cleaning even with a small circulation of water. Particles of pollution settle on the gutter, which is located in the central part of the bottomfiberglass pool or along one of its walls (if there is a drain box), from where they can be easily removed. The working part, i.e. the inner surface of the fiberglass pools is smooth and shiny (covered with gelcoat), which facilitates the maintenance of cleanliness.
The bottom of square and round composite pools for fish farming has a bias towards the central part, which contributes to the complete and speedy descent of water and drying.
To prevent fish from entering the water discharge system, all models of composite pools have a pocket for installing a gutter, which can be made of stainless steel or aluminum, fiberglass. The system for draining water from pools allows you to connect it with PVC pipes with a diameter of 50 - 100 mm, depending on the need. In the design of fiberglass pools for fish farming, the following drainage systems can be applied:
- telescopic system;
- inner or outer gutter box;
- inclined pipe.