- Home
- Companies
- Nixalite of America Inc.
- Products
- Nixalite - Model ST - Garden Safe ...
Nixalite - Model ST - Garden Safe Electric Fence Kit
Safe, all-in-one box electric fence kit protects gardens, freshly planted/seeded areas, small shorelines, hobby ponds and other areas from rabbits, raccoons, ground hogs, skunks and other pest animals of similar size. Powered by 110VAC (plug in), Garden Protector uses a mild but persuasive shock to teach nuisance animals to keep away from the areas inside the Garden Protector.
Garden Protector is Safe & Humane
The electric fence kit is safe to use. When switched on, the electrified fence wire uses mild shocks to train nuisance animals to stay away. Yet the mild shock is safe for animals and humans.
- Enough to create up to 100 lineal feet of fence (2 wire)
- Includes 10 - 28" posts
- Extra posts & wire available as accessories
- Safe for humans and animals
- Installs quickly and easily, no special tools needed
- Uses 110vac plug in power
- Indicator lights show fence status
- Uses charger #ST AC500 for power
- Easy to shut off at charger or at plug in wall
Each Garden Protector Kit includes: 210ft of conductive wire, 10 - 28" fence posts, one ST AC500 110 Volt AC, plug in charger, 2 ft long ground rod and assorted hardware. This is enough to create 100ft of 2-wire fence, or 66 feet of 3-wire fence, or 50ft of 4 wire fence. You can expand the kit by ordering additional posts and wire.
Basic Instructions:
These steps provide a BASIC procedure for installing the Garden Protector Fence. Detailed installation instructions come with the Garden Protector
- Following the printed instructions for your Garden Protector, find the best spot for the metal ground rod. Drive it into good conductive earth (not rocky or sandy) until there is about 2" showing.
- Mount the energizer at eye level and out of the reach of small children or animals. Plug in the charger and watch the indicator light to make sure you have good power. Turn the charger off and unplug it before continuing.
- Space 10 supplied fence posts a maximum of 10 feet apart around the perimeter of the space to be enclosed.
- Push the posts into the ground about 6". Install the bare wire into the wire clips (4 per post) on each post. You decide on how many rows you want to install.
- Install warning signs on the top row of wire by running the wire through the signs.
- Make sure the fence line is clean and free of grass and other foliage. Any plants touching the wires will reduce the effectiveness of the enclosure.
- Attach the fence controller to the ground anchor using a section of the bare wire.
- Attach the charger to the fence using a section of the bare wire.
- Test the enclosure by plugging in the charger and turning it on.