HydroPoint Data Systems, Inc.
Model Flow3 -Hydrometer with Flower Sensor and Water Meter
Flow3 is our most flexible and affordable hydrometer. Combined with a WeatherTRAK controller, you’ll get the protection of a master valve, visibility of a flower sensor and submetering capabilities of a water meter. Because the flow sensor, master valve and water meter are all integrated into a single, powerful unit, it’s easy to install, even in tight locations.
Most popular related searches
Flow3 is ideal for:
- New system installations
- Retrofitting existing systems
- Sites with limited install space
- High pressure situations
- Highly accurate performance makes it ideal for most commercial sites.
- Built-in master valve so if a break is detected, the master valve will automatically close and prevents damage.
- Easy to read register with sub-metering and displays that won’t lose data.
- Easy to install.
- Built to last: based on heavy-duty construction and no moving parts.
- Accurate performance for commercial sites
- Sizes: 1 ½” (Union), 2” (Threaded), 3”, 4” and 6” (Flanged)
- 8 to 860 gallons per minute flow range
- Accuracy across a wide flow range (up to ± 2% see chart on back)
- Powerful mainline control
- Prevent catastrophic water loss
- Double-chambered valve provides quick acting and positive opening and closing
- Easy to read register
- Provides on-site submetering
- Two register options: Photo Diode – high frequency or Reed Switch – low frequency
- Odometer style register displays won’t lose data
- Easy to install
- Requires no straight pipe upstream or downstream of unit
- Low installation cost vs. installing each component separately
- Ideal for installations where space is limited
- Built to last
- Heavy-duty cast iron construction with corrosion-resistant body
- Stainless steel encapsulated registers guaranteed against fogging due to moisture
- Sizes: 1 1/2″, 2″, 3″, 4″, and 6″
- Maximum working pressure: 235 psi
- Minimum working pressure: 14 psi
- Body: Cast iron, polyester coated
- Connections: Threaded, flanged
- Register Types: Reed Switch, Photo Diode
- Register: Odometer style with 3 fractional dials
- Power: photo diode requires a constant supply of DC power
- Valve diaphragm: Reinforced natural rubber
- Flanges: Drilled according to ANSI specification
- Standards: EEC approval (class A)
- Compatible with: ET Pro3, ET Pro3 2 wire, LC Controllers, WeatherTRAK FlowLink, FlowShare, and WeatherTRAK Central