Modern - Disk Harrow
Step 1. Place front right and left gangs in following position so that they cut and push the dirt away. Step 2. Then place left and right rear gangs in the following position so they will cut and pull the dirt back.
-
Most popular related searches
Products Details
- Step 3. Remove the (8) U-bolts, washers, nuts, from the bearing arm. (Figure 2)
- Step 4. Place the disc frame onto the front and rear gangs. (Figure 3) Install U-bolts across disc frame through bearing arm. Secure with lockwasher and nut provided. Repeat step until all gang arms are attached to disc frame. (Figure 4)
- Step 5. Once all gang arms are attached and in desired location, tighten securely.
- Step 6. Bolt hitch to frame as shown with hardware provided. Do not tighten all bolts until the hitch is assembled. (Figure 5)
Gang Angle Adjustment
Remove Click pin and pull pin. Adjust front and/or rear gangs using the holes in the adjustment bracket. (Figure 6)
Customer reviews
No reviews were found for Modern - Disk Harrow. Be the first to review!