J.P. Carlton - Model 1290 Series (9 In.) -Portable Wood Chipper

• 35 HP Vanguard V-Twin
• 54 HP Kubota 4 Cylinder Gas
• Disk Style

For Durability and Dependability nothing compares to J.P. Carlton.

• Heavy Duty 1 ½ ” Feeder Bar
• 12″ x 9″ Feed Opening makes feeding the bigger branches and limb material easy.
• Heavy Duty 2,000 pound capacity tongue jack
• Folding Feed Table
• Swivel Discharge quickly and easily allows the operator to fill chip trucks corner to corner, or direct the chips to a precise place on the lot.
• Locking Fuel and Hydraulic Tanks are sleekly designed to fit neatly within the confines of the frame. Locking caps prevent vandalism.
• Taillights Mounted Down, out of harms way.
• 48″ Wide Feed Chute takes the big tops, requires less trimming by the crew!
• Two Speed Four Wheel Drive Self-Propelled and Two Speed Rubber Track Undercarriages Available.

• Weight: 2930 Pounds
• Length: 132 inches
• Height: 93 inches
• Width: 67 inches
• Tires: 225/75R15 Ld Rng C 1760 # @ 50 PSI
• Axle: Dexter Torflex 5200-Pound Cap
• Brakes: Electric Available as Option
• Hitch: 8” Height Adjustable 2” Bulldog
• Fuel Capacity: 9 Gallons
• Battery: 29HVD 650 CCA
• Jack Stand: 2000 # Cap Screw Type Swing Up

Engine Options (Varies depending on selection of engine make & model)

• Manufacturer: Vanguard 35 HP V-Twin
• Number of Cylinders: Two
• Bore: 85.5 mm
• Stroke: 86.5 mm
• Displacement: 993cc
• Maximum RPM: 3600 RPM
• Horsepower: 35 HP
• Torque: 53 Ft Lbs
• Cooling Medium: Forced Air
• Air Cleaner: Two Stage Dry Type
• Oil Filter: Full Flow Spin On
• Oil Capacity: 2.3 Quarts
• Oil Type: Briggs
• Electrical: 12 Volt
• Gauges: None
• Clutch: Sliding Positive Lock Engagement

Bearings

• Disk Bearings: 2 7/16 inches Tapered Roller
• Feed Roller Bearings: 2 inch Ball
• Disk Shaft: 3 1/2 inch Removable
• Feed Roller Shaft: 2 inches Engagement
• Feed Lift: 1 inch Flanged Ball

Chipper Disk

• Wheel Diameter: 30 inches
• Wheel Thickness: 1-1/2 inches
• Disk Balance: Precision High Speed Balanced
• Wheel Speed: 1440-RPM Nominal
• Number of Knives: 2
• Knife Dimensions: 10-3/16” x 4 x1/2”
• Anvil: 4” x 8-7/8”x 1/2” AR400
• Chip Throwers: Two 3/8”x 4” x 4” x 11” long

Cutting Dimensions

• Throat Opening: 12″ x 9″

Hydraulic System

• Hyd Pump Displacement: .329 in cu/rev
• Hyd Pump Drive System: Direct Drive off Engine Mount
• Flow: 5.33 GPM
• System Relief: 2500 PSI
• Oil Tank Capacity: 9 Gallons
• Oil Type: AW32
• Valve: Series Type
• Hose: 16,000 PSI Burst – Exceeds SAE 100R2
• Oil Filter: 10 Micron Return with Suction Strainer

Drive System

• Engine Sheave: 6/3V5.6
• Disk Sheave: 6/3V14.0
• Drive Belt: 6 Band 6/3V750

Feed System

• Feed Motors: Top- 32.7 in cu
• Flow: 5.41 GPM
• Hydraulic Drive: Live – Driven off engine
• Autofeed: Digital Fully Adjustable
• Feed Rate: 100 Feet Per Minute
• Feed Rollers: 10 1/4” x 11.5”
• Springs: Two 15″ Tight Wound Powder Coated
• Slide Bearings: Two 1″ Flange Mount
• Lift Cylinders: 2” x 10” with 1” attachment
• Discharge: 360 Adjustable Swivel w/Deflector

Frame

• Main Trailer Tongue: 2″ x 4″ with 1/4″ wall
• Main Trailer Frame: C4 X 5.4 Channel
• Engine Channel Mnts: Sliding Positive Lock Engagement
• Infeed Chute: 10 Gauge with 1″ tube frame
• Folding Infeed Tray: 10 Gauge with 1” tube frame
• Folding Tray Lock: 3/16” thk.
• Discharge Chute: 10 gauge neck with 14-gauge discharge
• Discharge Lock: 3/4″ Spring Loaded Pin
• Fuel Tank: 10 gauge with baffles rubber mtd
• Hydraulic Tank: 10 gauge with baffles rubber mtd
• Battery Box: Marine Battery Box
• Fenders: 10 gauge checker plate
• Feeder Bar: 1 1/2″ OD x 1/8″ wall – removable
• Radiator Guards: None
• Light Brackets: 3/16″ with hidden wiring
• Axle Mounts: 1/2″ Plate
• Hitch Plate: 3/4″ Plate adjustable 8″ Up/Down