Pro-Max - Model 36 -Mowing System

Since 2007, Progressive has offered turfgrass production mowers with heavy-duty, galvanized deck shells. Ideal for producers with farms that have highly acidic soils or where certain fertilizers can accelerate the corrosion of a traditional painted deck.

The Next Generation PM-36 can be configured with:

• Galvanized shells for long term durability in these conditions
• Painted shells for less severe environments

Incorporated into each new deck frame are heavy spindle mounting plates that are designed to provide additional structural rigidity. The deck shell is now captured between each blade spindle and the mounting plate to control any flexing that may occur. The result is a superior, more accurate cut.

The air flow hoops under the deck shell are a key part of the high quality cut that the Pro Max System is known for. The PM-36 hoops are made of heavier 3/16" plate, adding both increased life and rigidity to the deck.

Efficient airflow is a key component of the overall design that provides the high quality of cut the PM-36 is known for. With this in mind, the discharge opening of each deck has been made taller, aiding clipping dispersal and reducing the streaming that sometimes occurs when mowing long, wet grass. By revising the discharge opening on the Next Generation PM-36, fanning of the clippings is increased when mowing warm or cool season grasses. See Illustration.

Progressive has retained the high blade tip speed (over 18,800 fpm) which is another key component of the design.

Cross-contamination between crops is a concern for many producers, but not all producers can justify dedicated mowers for each crop. As cleaning can be time consuming and inefficient, the Next Generation PM-36 deck frames have been designed to minimize `pockets` where clippings can collect, greatly reducing cleaning time. The rear cross member of each deck has been raised above the deck to provide a large wash-out area (see arrows). The wash-out area is blocked when the belt covers are installed, mimimizing clipping build-up.

It is a well-known fact that many PM-36`s remain in active service after operating 15 years plus in the field! Knowing this, Progressive Turf Equipment has made the PM-36 even easier to rebuild, which helps to control long term ownership cost. The PM-36 transport axle has been made bolt-on. See highlighted box. Common with the TD92 transport axle, if service to the axle spindle is required, it can be simply and economically replaced.