Ritter GmbH
  1. Companies
  2. Ritter GmbH
  3. Products
  4. ProGrass - Plastic Grass Pavers

ProGrassPlastic Grass Pavers

SHARE
Our ProGrass plastic grass pavers attach green areas without sealing them. They serve the renaturation of land and the greening of parking areas such as grass driveways . They are also suitable for slope stabilization and the establishment of occasionally used service areas and fire driveways.
Most popular related searches

Green fire driveways
Our plastic grass pavers are quick and easy to lay, using a plug-in system for installation. In this way, you not only realize green fire service access roads but also occasionally used parking lots and driveways.

For a wide variety of different outdoor areas
A second parking lot for guests, parking space for camper or trailer – our grass pavers made of pure recycled plastic produce offer adequate stability and can be used safely even in wet weather. When used in combination with fully sealed surfaces, ProGrass also works as an extension and gives narrow paths more width when needed.

Golf courses and utility areas
Green as far as the eye can see: golf courses and general utility areas benefit from the green, which grows densely in our grass pavers. Maintenance is the same as for a normal lawn. ProGrass is frost resistant and resistant to UV and IR radiation.

  • Empty: 100 t/sqm
  • Filled: up to 800 t/sqm
  • Permeable to water
  • UV and frost resistant
  1. Grown ground
  2. Base course
  3. Installation bed with grass substrate (4-5 cm)
  4. Grass reinforcement panel
  5. Substrate for grass reinforcement
  6. Seeds for grass reinforcement
  • Article no. 30103-0000
  • Dimensions 500 × 390 × 45 mm
  • (19,69 × 15,35 × 1,77 in)
  • Installation format same as panel format
  • Requirements per m²
  •     approx. 5 pieces grass pavers,
  • 25 g grass seeds,
  • 0.102 – 0.111 cbm grass substrate
  • Weight per panel approx. 1.1 kg
  • Weight per m² approx. 5.5 kg
  • Material recycled plastic: HD-PE regranulate,
  • sorted, environmentally neutral
  • Pallet content approx. 24 m² or 36 m²
  • Pallet format 120 × 80 × 145 or 125 cm
  • Pallet weight 150 or 220 kg
  • Infill material requirements approx. 45ltr./m²
  • Load  according to the guidelines for fire service accesses 1,000kN/m²
  • (LGA Bavaria No. 79202396 and MK 3503513/2)
  • Colours green, anthracite.
  • special colors on request.
  • Connection system
  • The panels will automatically stabilise each other once installed.
  • Accessories ProGrass markers for labelling utility areas and parking spaces. Standard color is white.
  • Load test for fire service access routes
  • Load test in filled condition
  • Load test for small aircraft
  • Determining the permanent deflection strength