- Home
- Companies
- Exmark Mfg. Co., Inc.
- Products
- Radius - Model S-Series - Rear ...
Radius - Model S-Series -Rear Discharge Ride-On Mower
The Radius rear discharge zero-turn mower comes with a UltraCut Rear Discharge deck. A 60” cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Exmark engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. The Radius S-Series improves productivity and provides maximum comfort. (Photo is of 2017 model year. Select Radius S-Series Rear Discharge mowers are also equipped with suspension platform.)
Available in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Power Components
- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.50"-diameter cutter housing contains 17mm (.67")diameter spindle shaft and hex blade drive.
- Drive Tires 23 x 10.5-12 K500
- Cup Holder Standard
- Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
- Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
- Parking Brake Lever-actuated pawl brake.
- Seat High back seat with foam padded seat cushion , armrests, integral safety switch, and adjustable Seat Isolation System
- Electrical 12-volt battery with 15-amp alternator.
Power Components
- Engine Brand Kohler®
- Engine Model ZT740
- Engine Displacement 747
- Engine Series Confidant™
- Engine Type Carbureted
- Engine Speed 3,700 rpm
- Air Filter Cyclonic Air Cleaner
- Fuel Type Gas Carbureted
- Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
- Fuel Indicator Translucent Visual
- Drive Hydro-Drive
- Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
- Speed Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
- Carb Compliant No
- Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS 2-post foldable ROPS standard with seat belt and latch.
- PTO Engagement MagStop electromagnetic 125-ft-lb clutch
- Drive Wheel Release Allows unit movement without engine running.
- Casters .375" thick caster yoke arms
Decks
- Width / Cutting Deck 60"
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
- Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
- Blade Tip Speed Approximately 18,500 fpm.
- Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator`s seat.
- Blades 3 Blades at 20.50" Length
Dimensions
- Width 66.0 in ( 167.6 cm)
- Length 84.3 in (214.1 cm)
- Height 70.2 inches (178.3 cm)
- Curb Weight 1012