Silo Cut - Silage Shear
A sharp cut in the silage stock prevents the formation of mould and impurities on the cut surface. The power of the large dimensioned hydraulic cylinder is distributed completely evenly. Thus both absolute freedom from distortion on the device and a uniform and clean quality of cut is guaranteed.
Practical details also ease the work for the farmer.
With the MAMMUT Silo Cut the block loosens itself from the basket more easily because the main pivot points are set back. In addition, the side cutters are not burdened during insertion. Optionally, a manual or hydraulic pusher facilitates placement of the silage block.
The Silocut is intended for all standard mounting options, from three-point with or without lifting frame to front loader, farmyard tractor, wheel-or telescopic loader.
Conveniently deposited in the barn
The silage block is conveniently deposited with a manual or, optionally, with a hydraulic pusher.
Cleanly cut through
The block is cut through completely with a powerful and smooth incision, as the cutting edge reaches far below the prong level. The prongs themselves are wear-resistant and dimensionally stable.
Functional for decades
High-quality, greasable bearing bushings ensure durability and trouble-free operation.
Less wear & tear saves money.
The absolute equal pressure on both hydraulic cylinders is guaranteed by a flow divider. This hinders lateral delay forces and reduces wear & tear..
To the last granule
A hinged floor plate also hinders feed losses with fine-granulated silage - everything lands cleanly on the feed table.
Extended terminal date
Powerful and clean cut for extended preservability of the silage
The high opening angle of the Silocut H even enables, in addition to the removal of huge blocks of silage, the breaking up of round bales.
from the tractor with hydraulic valves. The operating element can be adjusted in height and tilt.
from the tractor with electro-magnetic valves. The operating element can be adjusted in height and tilt.