Sulky Burel - Model DX20 - Fertiliser Spreader
From Sulky Burel - Fertiliser Spreader
The double cone hopper bottom enables rate irregularities caused by foreign bodies to be detected immediately. In addition, its steep-sloped walls guarantee a regular flow of fertiliser, even when tilted and at the end of the hopper.
-
Most popular related searches
Details
Once the chute is in place, simply indicate the distance on the scale and weigh the result obtained. This same scale will then give you the right shutter setting.
3 convincing arguments:
Maximum accessibility
Quick-fitting chute... no spanner needed
No restrictive handling
ERTIWAY : No. 1 in spreading widths
Developed on the DPX range and perfected on the DX range, the FERTIWAY width control is the reference in centrifugal spreading. It works by modifying the fertiliser dropping point on the disc by using an exclusive output chute.
1 The chute: Tilted, guides the fertiliser accurately onto the disc.
2 The dropping point: This is the simplest mechanism for adjusting the working width. Its adjustment requires no modification to the disc rotation rate, nor do the ejection blades need to be touched.
Tilted rate shutters: more than just a mere detail 3 convincing arguments:
Complete emptying with ZERO 'dead' volume
No sensitivity to fertiliser load in the hopper
Instant opening/closing with no possible blockage.
2 convincing arguments:
Large scales for error-free width and rate settings
Total scale visibility regardless of the number of hectares spread
Features
- Standard category II linkage pin
- Angle gearboxes guaranteed for 3 years
- Dual opening anti-clod screens
- Stainless steel base and dual oscillating agitator - Tilt indicator for late spreading
- Rate limiters for slug pellets and small seeds (3 kg min)
- Stainless steel safety rail
- ECOBORD blade for edge spreading environmental constraints
- 1/2 width stainless steel central edge deflector
- Shutter control by R/L levers (stainless steel cables, Teflon-coated sheath) (2SA) R/L
Options
- TRIBORD 2D system (factory-fitted)
- Sulky guide bar
- Calibration test kit (including Kit scale)
- 600 l extension (1 unit maximum)
- DX hopper cover
- Lighting
- Rear and side indicator stickers
- Pilot check valves for hydraulic shutter control devices (2 DA)
- Complement for use of the hydraulic control device by 1 SA distributor only (2SA into 1SA)
- Complement for use of the hydraulic control device by 1 DA distributor only (2SA into 1DA)
- Increase for long transmission with torque limiter for bag lifter (length 1010 mm retracted)
- Anti-compaction baffles for crystallized ammonium sulphate and rye grass
- Overlap checking kit and granulometer
- Retractable ground support stands (central runner + stands)
Customer reviews
No reviews were found for Sulky Burel - Model DX20 - Fertiliser Spreader. Be the first to review!