- Home
- Companies
- Insect-O-Cutor (IOC)
- Products
- Insect - Model Series 18204E - Wall ...
Insect - Model Series 18204E -Wall Recessed Insect Light Traps
esigned to comply with the American with Disability Act (the ADA), Insect-O-Cutor`s recess mounted insect light traps (ILT) offer a mechanical pest control option for facilities concerned with flying insects and ADA compliance. Electronic fly killer (EFK) series 18204E and 36204E are powered by electronic-ballasted circuitry that converts normal 60 Hertz line current to 25 kHz… for increased operational efficiency — resulting in an 8% to 15% increase in light output. The safety guard has slightly larger, overlapping dimensions than the unit. The vertically beveled guard abuts firmly to the wall surface. Note: the wall recessed body is in aluminized steel metal material.
Installation: For stability, the body of this insect light trap should rest atop a permanent cross-brace/platform secured horizontally within the wall opening. The unit body may be adjusted forward or backward upon brace/platform to accommodate proper wall depth. Convenient side holes allow access to a wall stud/support. Keyhole slots on the back of this electronic fly killer allow for securing to a rear surface.
Energy Efficient Model Numbers
- Metal Finish
- Beige Textured 18204EDGR
- Aluminized Steel 18204EDGAR
- Stainless Steel 18204EDGSR
- Black Light Lamps 18 BL Unfiltered and 18B BLB Filtered
- Gross Weight of
- Specific Models Beige Textured = 25 lb / 11.3 kg
- Aluminized Steel = 25 lb / 11.3 kg
- Stainless Steel = 28 lb / 12.7 kg
- Dimensions of Wall
- Recessed Unit 13.0" Wide X 28.5" High X 4.125" Deep
- Dimensions of Safety Guard 14.5" Wide X 29.875" High
Design Features of the Wall Recessed Insect Light Trap: The three-wire grounded cord and plug is positioned on top of unit to ensure trouble-free recessing. Tamper-resistant safety guard affixed by four removable screws. Internal metal insect collection drawer; wraparound reflector panel behind electric grid to increase black light emission; spring-loaded and fixed lampholder sets for simple lamp installation and replacement.
Insect-O-Cutor® Insect Light Traps
For use in areas where low life time cost insect light traps are preferred. Our wide range of models provides a variety of choice for almost any area within your facility … from warehouse load docks … to production areas … to labs … to even office areas. Insect-O-Cutor® insect light traps and glueboard flytraps incorporate state-of-the-art, energy-efficient components and black light insect attraction lamps that meet our stringent criteria.
Energy-efficient models are designed to comply with various energy conservation programs (LEED, Green-lights, EPACT). Electronic-ballasted units reduce overall electrical consumption while actually increasing light output by 8% to 15% per lamp due to increased operational efficiency. Less energy consumed … more insect attraction light emitted.
High performance ILT models, now discontinued, utilized ultra-high current circuitry to increase insect attracting black light emission. An Insect-O-Cutor® innovation, ultra-high current circuitry over-drove insect attraction lamps without shortening lamp life.