Only show results in Virginia? Ok

Soil Water Potential equipment for Agriculture Monitoring

  • Premium

    Delta-T - Model EQ3 - Equitensiometer

    The EQ3 uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry soils.

    By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Soil Science - Soil Water Potential Product line

  • Premium

    TensioMark - Matric Potential Sensor

    The TensioMark measures the soil water potential or matric potential. The soil matric potential is the pressure it takes to pull water out of the soil and is an indicator of stress to plants and crops, can be used to determine soil water fluxes and available water held in the soil. Water equilibrates with the ceramic tip portion of the sensor ...

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA). from Soil Sensors Product line

  • Border - Model Xtra 8L - Activator & Drift Retardant

    A patented, liquid activator adjuvant formulated to maximize crop protection performance on a wider range of weed species by maximizing adhesion of the spray solution to the leaf surface, while providing required amounts of ammonium and sulfate ions for improved uptake. Provides 8.5 lbs of ammonium sulfate plus the optimum 8 oz level of HPG ...

    By Precision Laboratories, LLC based in Waukegan, ILLINOIS (USA). from AMS-based Adjuvants Product line

  • 229-L Water Matric Potential Sensor

    The 229-L Water Matric Potential Sensor measures soil water potential from 0.1 to 10 bars. The sensor consists of a heating element and thermocouple emplaced in epoxy in a hypodermic needle, which is encased in a porous ceramic matrix. To calculate soil water matric potential, a Current Excitation Module applies a 50 mA current to the 229's ...

    By Campbell Scientific, Inc. based in Logan, UTAH (USA). from Sensors Product line

  • Caipos - Model MPS-6 - Dielectric Water Potential Sensor

    Dielectric water potential sensor. Measuring of water potential is important for irrigation management, crop stress, water losses studies. The sensor is easy to install and does not require calibration or maintenance. Sensor can be used with CaipoBase weather station.

    By Caipos GmbH based in Seiersberg, AUSTRIA. from Sensors Product line

  • Roughage Intake Control System (RCI)

    The RIC (Roughage Intake Control) system provides researchers at institutes and experimental farms with a wealth of valuable information and the system is extremely labour saving.

    By Hokofarm Group based in Marknesse, NETHERLANDS. from Cattle Mgt- RIC system Product line

  • Aerite - Feed Broadcast Spinners

    Aerite™ Feed Broadcast Spinners are fast rotating dry pellet feed distributor heads designed to uniformly broadcast a range of feed pellet sizes from 2 mm to 12+ mm. over a wide diameter circle. With two model sizes to choose from, Aerite™ Feed Broadcast Spinners are ideally suited for pond, raceway, and sea cage applications. Best ...

    By IAS Products Ltd. (Integrated Aqua Systems) based in North Vancouver, BRITISH COLUMBIA (CANADA). from Feed Systems Product line

  • Decagon - Model MPS-6 - Calibrated Water Potential Sensor

    The MPS-6 is a matrix water potential sensor that provides long term, maintenance-free soil water potential and temperature readings at any depth without sensitivity to salts. The range of the MPS-6 goes from field capacity to air dry. Lab and field tests indicate that it can make accurate measurements at water potentials at least as dry as ...

    By METER Group, Inc. based in Pullman, WASHINGTON (USA). from Water Potential Product line

  • Border - Model Xtra DF - Activator & Drift Retardant

    Designed to maximize crop protection performance on a wider range of weed species by maximizing adhesion of the spray solution to the leaf surface. Provides 17 lbs of ammonium sulfate plus the optimum 8 oz level of HPG polymer technology. HPG polymer technology has also been proven to provide superior drift reduction characteristics when compared ...

    By Precision Laboratories, LLC based in Waukegan, ILLINOIS (USA). from AMS-based Adjuvants Product line

  • Model MPS-1 - Dielectric Water Potential Sensor

    Water potential data with the simplicity of a soil moisture sensor—no maintenance required. Range: -10 to -500 kPa (pF 2 to pF 3.71), moderate accuracy with factory calibration.

    By Decagon Devices, Inc. based in Pullman, WASHINGTON (USA). from Water Potential Sensors Product line

  • Catenary Monitoring System

    Swing bridges over water rely on correct alignment of catenary horn locking to avoid delays and potential damage. Our Catenary Monitoring System (CMS) is a laser-based, moveable-to-fixed alignment system which, for the bridge operator, takes the guesswork out of visually aligning markers. Fully customized visual indicators will be added to the ...

    By CNIguard Ltd. based in Stanmore, UNITED KINGDOM.

  • Side Stair Tank

    Closed Top \ Smooth Wall. “V”-Bottom Floor. 500 BBL (21,000 Gal.). Easy Step Stairway Design. Environmental & Oilfield. Configuration

    By Manitex Sabre Inc based in Knox, INDIANA (USA). from Frac Tanks Product line

  • Tensiometers

    These modernized tensiometers, built by German company UMS, are THE most accurate way to measure soil matric potential. Thanks to precision engineering, meticulous construction, and fanatical attention to detail, they have terrific accuracy and a range that (with a skilled operator) can extend beyond -200 kPa.

    By METER Group, Inc. based in Pullman, WASHINGTON (USA). from Water Potential Sensors Product line

  • Equilibrium Tensiometer

    The Equitensiometer (Equilibrium tensiometer) is a device for maintenance-free measurement of soil matric potential (suction, water availability for the plants). This device is based on a patented new principle and has many advantages over the normal water-filled tensiometer.

    By Ecomatik based in Dachau/Munich, GERMANY. from Equitensiometer Product line

  • AquaSorp Isotherm Generator

    The Aquasorp IG brings click and read efficiency to soil isotherms. In 24 to 48 hours, Aquasorp generates ip to 200 points ( range -5 to -500 MPa) to create a soil moisture release curve (water potential vs. water content). The aquasorp creates both a wetting and drying curve to identify any potential hysteresis in a soil. Whether you are studying ...

    By METER Group, Inc. based in Pullman, WASHINGTON (USA). from Water Potential Instruments Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you