AFKO Ltd. Şti. products

This system consists of many spans connected to each other by mobile connection. All spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degrees. Thus, the pivot is suitable for rough terrain. This system irrigates from 1 hectare by one span up to 100 by 100 spans 560 m machine.

This system consist of many spans connected to each other by mobile connection, all spans move and rotate around a fixed center. Every two spans are connected by a multidirectional joint allowing the formation of an angle of up to 30 degree. Thus the pivot is suitable for rough terrain. This system irrigates from 1 hacter by one span up to 75 by 8 spans 490 m machine.

Linear irrigation machines travel back and forth across your field instead of around a central point as a center pivot does. A linear can move in a straight line, in forward or reverse. Their mobility makes linears one of the most efficient for ms of farm irrigation, typically irrigating 92 to 98 percent of a square or rectangular field. Linears can also assist with chemigation, fertigation, and germination, and can help decrease leaching that can occur through other irrigation methods.

Drip irrigation is sometimes called trickle irrigation and involves dripping water onto the soil at very low rates (2-20 litres/hour) from a system of small diameter plastic pipes fitted with outlets called emitters or drippers. Water is applied close to plants so that only part of the soil in which the roots grow is wetted (Figure 60), unlike surface and sprinkler irrigation, which involves wetting the whole soil profile. With drip irrigation water, applications are more frequent (usually every 1-3 days) than with other methods and this provides a very favourable high moisture level in the soil in which plants can flourish.

Sprinkler spray sprinklers are an excellent option for smaller applications, such as residential landscapes. Unless otherwise specified, nozzles are sold separately from the spray body. This allows you to custom select the spray patterns for each spray head, matching them to your landscape’s specific layout. Sprinkler Irrigation Systems offers a huge selection of spray heads and nozzles, from a wide variety of manufacturers.

Heat-treated aluminum and steel drive shatf construction, self-aligning design and UV/chemical resistant urethane inserts.

Enclosed collector ring to supply continuous power and signal voltage to the motors and controls on center pivot irrigation systems.

The AFKO   Gearbox is designed and built to operate under today`s most demanding growth conditions. There is a stronger, heavier worm gear pre-loaded worm gear and our new patented shaft seals that keep oil entering and problems out. The heavy-duty bronze bull gear is an option available for extreme applications. Designed to cater for longest day lengths. Each component is designed to deliver the torque requirements required by your soil and tire combinations.

The tower box is made up of white, heavy-wall UV stabilized thermoplastic with a galvanized steel base. It has a steel camshaft and adjustable, moisture-resistant directional micros features. The rigid base and oversized cam spring enhance machine alignment characteristics to reduce structural stress.

Hardened helical gear and all-aluminum gear case and motor housing provide years of reliable service.