B&B Scales LLC products

Animal & Livestock Scales

B and B Scales - Single Animal Weighcage

Our single animal weigh cage is custom built to fit your alleyway. The size can be as big as 48` x 8` (this is the maximum size of the sheet steel for the floor), down to whatever size you need for your alleyway. Typical cages are 39` x 7`6`, but many alleyways are 36` wide or less, so it really depends on your set up. We`ve found that 7` is long enough for most breeds and 34` is probably the minimum you`d want to go on the width. Also keep in mind that anything more than 38` may be enough room for calves to turn around.

Extreme Duty Weighbars

We’ve been custom-building our own weighbars for almost 10 years now, and we’ve learned quite a bit about what makes a set of weighbars last.

Farm Bars

Safe Overload: 150% Full-Scale Output (FS): 3mv/V nominal** Maximum Excitation: 15 VDC Non Linearity: 0.02% FS Hysteresis: 0.02% FS Thermal Sensitivity Shift: 0.0008% of reading/° F Thermal Zero Shift: 0.0015% FS/° F Side Discrimination: 1000:1 Bridge Resistance: 350 ohms Temperature Range: -40 to 111°F (-40 to 44°C) Cable Configuration: 8 ft between bars and 12 ft for the indicator Warranty: Two-year limited warranty ** Output is standardized for each model of load bar, consult factory for details.

Replacement A/C Adapter - Single Pin

This is the replacement adapter for the OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.

Indicator Rebuild Kit

Do you have an old LP-7510 indicator lying in the junk pile? Did your OP-900 get soaked or struck by lightning? This series of indicators has been for sale in the US for over a decade, and our kit has all the parts in it that you’ll need to completely rebuild it, from the ground up. If you still have the steel chassis, this kit has the rest.