Becx Machines B.V products

The Becx HS75ER is the latest machine in the hedge trimmer range of Becx Machines. This hedge trimmer represents a further development of the existing HS75HR. Because hydraulic motors have been replaced by 48-volt electric motors, it is now possible to trim hedges while releasing zero emissions. This trimmer, which is powered by electric motors, possesses exactly the same qualities as our regular hedge trimmers.

The Becx HS75HR is the smallest machine in the hedge trimmer range of Becx Machines. This hedge trimmer has two trimmer heads and has been fully re-design. Due to the limited dimensions and smaller components, both the weight is low and the required oil flow is very small. The HS75HR is therefore compatible with even the smallest of tractors. Of course, this trimmer also has all the qualities that you associate with Becx Machines.

The Becx HS130HR hedge trimmer has been specially developed for professional hedge trimming in a single work process. Trimmed material is cut into fine pieces by the double blade (inside the sealed casing) and inserted back into the hedge. This helps to minimize the clean-up and disposal of hedge trimmings. Becx Machines’ patented cutting system ensures the very highest trimming quality.

The Becx Machines hedge trimmer HS131C is a further development of the HS131HR. Due to changes in the casing and the blade, it is now possible to collect the trimmed waste in an extraction container.

We listened to our customers and their experiences with the HS130HR and HS150HR, and have been able to take hedge trimming with the Becx HS131HR to the next level. The machine’s capacity is slightly higher than the HS130HR. The machine is even better at mulching, discards even less trimmed material and has a more robust casing.

From now on, you will be able to use your wheel loader for a wider range of purposes thanks to the WLA60. This trimming arm makes it possible to assemble Becx Machines hedge trimmers on your loader. The WLA60 has been designed so that it can be attached to more or less any wheel loader. Becx Machines offers various solutions if your wheel loader does not feature the required double valves.

Mechanical trimming pays dividends! However, you need the right tools. Naturally, you can rely on the hedge trimmers of Becx Machines. In order to effectively use these trimmers, Becx Machines has also developed its own mowing arms. The MA270 is a mowing arm with a reach of 270 cm and can be mounted on the left- and right-hand side of the carrying vehicle. The MA270 arm is hydraulically adjustable. The tool coupling is rotated manually on the standard version but can be fitted with a hydraulic swivel unit. It is also possible to opt for a ‘non-adjustable head’, which makes it easier to
trim the reverse side of hedges. The mowing arm can easily be converted to other versions at a later time!

The OB90 is an ideal choice for users who cover a lot of cleaning meters every day. All configuration possibilities are controlled hydraulically, which allows the operator to easily reach all sides and corners without losing time. The brush arm has a large reach and can be swiveled from left to right. The head can be tilted backwards and forwards, and from left to right. This allows the operator to position the brush exactly wherever necessary. The OB90 is also available with hydraulically adjustable edge trimmers. Conversion is always possible if you later decide to use your machine to trim edges.

The M in OB90M stands for manual. The clever construction allows the user to adjust the OB90M fully to its wishes and requirements. Thanks to a swivel reach of 180 degrees, the machine can be used across a great range. The angle of the head can be tilted with respect to the paved surface. No hydraulic swivel options are used, which means the carrying vehicle only requires a hydraulic pressure and return connection.

The weed brush/edge trimming machines of Becx Machines make it possible to brush surfaces and trim grass in a single work process. The standard OBKS50-35 has a brush diameter of 50 cm and a trimming diameter of 35 cm. A standard machine allows the working width to be mechanically adjusted, as well as the height of edge-trimming blades in relation to the brush. The angle of the brush can also be mechanically adjusted.