20 products found

Products

  • Planters and Seed Drill

    Sowing is the key to making sure that your crop emerges uniformly, which is essential if you want to achieve maximum productivity at harvest time. Bellota has seed drilling discs for seed drills designed for a variety of different applications, such as direct and maize seed drills, for example. The success of seed discs is founded on the fact that they are designed to achieve a well opened furrow. Bellota discs, with their mechanically treated edges, geometries optimized for the job you are doi

  • Bellota - Flat Disc Bevels

    Bellota - Flat Disc Bevels

    Both the grooves and bevels play an important role in today's working conditions. BELLOTA designs the edges at just the right ratio, so as to be able to cut the stubble and penetrate well into the ground. An extremely sharpened edge can be cracked and broken, but an overly dull one will not penetrate into the ground or suitably cut the stubble.

  • Curved Subsoiler

    The new methods of tilling are aimed at burying only a part of the residual crop on the surface, allowing the rest to provide a protective layer. A well placed forward and lateral inclination of tines fluffs up soil, making it more porous while at the same time keeping the surface intact and improving the circulation of water and oxygenation in the soil, thus favouring root growth and plant development, in the final analysis achieving better yields at harvest time. In contrast to the more old-f

  • Curved Subsoiler

    Curved Subsoiler

    Characteristics: Boron steel. Integral hardening, guaranteeing a 50 Hrc hardness. Exclusive curved geometry for a perfect soil loosening.

  • Cultivator

    The cultivators are used in multiple functions: pulling weeds, clod crushing, loosening the land´s surface layer, forming a thin layer over the sow bed, preparing the land for irrigation and adding fertilizers. It is used both before planting (to prepare the land) and afterwards in row cultivations, with the right tines. The Bellota range covers the needs of diverse farm equipment such as sweeps, chisel, tines for tillage, cultivator, tiller and other agricultural implements.

  • Cultivator Points

    Cultivator Points

    Integral heat treatment, guarantee of long life. Characteristics: Boron steel. Hardness: 50 ± 2 HRc. Integral hardening to avoid deformations and rupture. Product uniformity guaranted by strict controls on quality and the production process.

  • Model S-Tines - Cultivator

    Model S-Tines - Cultivator

    Uniformity guarateed by the pre-tension. Characteristics: Special, high elasticity steels with high capacity to recover initial geometry. Specific integral heat treatment that provides each material with optimum characteristics. Pre-tensioned: eliminate the first deformations to maintain the shape and be able to provide a consistent job. Powder painted with UVA protection.

  • Clamps for S-Tines

    Clamps for S-Tines

    From 50 up to 80 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements.

  • Double Coil Tines

    Double Coil Tines

    High elasticity and recovery of the initial geometry. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each material with optimum characteristics. Epoxy paint with UVA protection.

  • Clamps for Double Coil Tines

    Clamps for Double Coil Tines

    From 50 up to 100 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements.

  • Bellota - Vibro Tines

    Bellota - Vibro Tines

    Uniformity guarateed by the pre-tension. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each material with optimum characteristics. Pre-tensioned: Eliminate the first deformations to maintain the shape and be able to provide a consistent job. Epoxy paint with UVA protection.

  • Bellota - Disc Harrow

    In this section you will find discs for disc harrows and disc tilling in a wide variety of concave forms and sizes. Bellota conducts very strict quality checks, guaranteeing that its discs will all be totally uniform, which means that any work you do with them will be excellent. The right hardness ensures the ideal level of flexibility and toughness to absorb impacts without breakage, and yet at the same time to resist the most abrasive soil conditions. All this guarantees that the discs pas

  • Bellota inPHInium - Disk Harrow

    Bellota inPHInium - Disk Harrow

    Today professional farmers are looking to optimize their efficiency. That's why they look for longer lasting products, as long as they are flexible and tough, and don't bend or break when working in difficult terrain. That's why BELLOTA has launched the inPHInium disc: the disc with the longest lifespan without breaking on the market.

  • Bellota - Quick Disc Change

    Bellota - Quick Disc Change

    The professional agriculturist needs to optimise his time. BELLOTA has been working for over eight years with agriculturists and technological centres in order to improve and design future products. As a result of this collaboration, BELLOTA has patented two quick disc change systems for rapid or light harrowing.

  • Bellota - Concave Disc Bevels

    Bellota - Concave Disc Bevels

    Both the notches and bevels play an important role in current working conditions. BELLOTA designs the edges so as to be able to cut the stubble and penetrate well into the ground. An extremely sharpened edge can be cracked and broken, but an overly dull one will not penetrate into the ground or suitably cut the stubble.

  • Bellota - Concavities Range

    Bellota - Concavities Range

    Boron steel. Hardness: 50 +/2 HRc guaranteed via the use of an automatic control system in heat treatment. This hardness ensures flexibility and the ability to absorb impacts without breaking, providing the disc a longer life-span, even in the most severe soil conditions. Lathed, precise and uniform edges, obtaining optimal soil penetration. Surpasses the ball test (tenacity test). The right disc hardness is key to ensuring the maximum resistance to...

  • Plough

    At Bellota Agrisolutions we build spare parts for the most important brands of agricultural tools, such as Kverneland ploughs, Kuhn mouldboard ploughs, Ovlac ploughs, Castillón ploughs, as well as Fiskars and Vogel & Noot, amongst many others. In the area of mouldboard ploughs we provide mouldboards, agricultural coulters, points, heels, blades and deflectors, as well as reversible and fixed mouldboards. For stubble ploughs, Bellota offers a wide range of parts adaptable to the eq

  • Plough Leaf Springs

    Plough Leaf Springs

    Complete leaf spring and individual sheets. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each leaf with optimum characteristics. The sheets are individually shot-blasted and painted before the set is assembled. Epoxy paint with UVA protection.

  • Points for Ploughshares

    Points for Ploughshares

    Special steel Borodur. Characteristics: Manufacture of parts in various steels and characteristics depending on requirements and product type. Boron steel. Three-layer material with different layer specifications and hardness values. Steel with hardened outer layers by means of complete thermo-chemical and heat processes. The process exceeds 40 hours and achieves a uniform layer of 60/65 HRc. Union of base material with tungsten carbide plates with...

  • Plough Leaf Springs

    Plough Leaf Springs

    Complete leaf spring and individual sheets. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each leaf with optimum characteristics. The sheets are individually shot-blasted and painted before the set is assembled. Epoxy paint with UVA protection.

  • Sugar Cane

    Bellota manufactures a wide range of spare parts for sugar cane harvesters, such as blades, choppers, straw cutters and primary and secondary extraction shovels. They are manufactured at our plant in Brazil, providing a wide range of parts to fit the most important brands of sugar cane harvesters. Base cutters are manufactured to measure with a variety of edge angles, numbers of edges and holes, depending on the needs of the individual customer, always with the best possible thermal treatment a

  • Sugar Cane Blades

    Sugar Cane Blades

    Characteristics: Special strength steel, resistant to cutting and wear. Special heat treatment.

  • Sugar Cane Adaptable

    Sugar Cane Adaptable

    The fans with longest life of the market. Characteristics: All parts are tempered, which improves performance and lifetime. Fan blades last 76% more others from competitors.