Bulagro AD

57 products found

products

  • Ploughs

  • Cultivators

  • Cultivators

    Cultivators

    70% of the weeds can be destroyed with mechanical weed control. The remaining 30% do not damage the culture plant decisively. From the mentioned 70 %, 70 % of the weeds are covered in the germination stage and only 30 % of the weeds are destroyed by being pulled out.

  • Disc Harrows

  • Disc Harrow

    Disc Harrow

    With this new carrier arm system two serrated concave discs are mounted on a wide clamping bracket. This ensures that the discs always retain their position and angle. Even in heavy soil it is impossible for them to deviate to the side – hard tyre tracks are broken up reliably. Four rubber elements in the mounting bracket provide overload protection on contact with rocks. The generously dimensioned discs have a diameter of 22.83' / 580 mm. Eight...

  • Rotary Harrows

  • FALC FOX - Rotary Harrow

    FALC FOX - Rotary Harrow

    FALC FOX Rotary harrow operating in any kind of soil.The series comes in two models - FOX 2500 and FOX 3000.Working width: from 256 to 305 sm.V.О.М.: from 540 tо 1000 rev./min..Required tractor power: from 60 to 120 hp.Weight: from 945 tо 1060 kg

Products by Bredal A/S

  • Bredal  - Model K40 - Lime and Fertilizer Spreader

    Bredal - Model K40 - Lime and Fertilizer Spreader

    This spreader has a standard capacity of 2,500 litres.K40 spreads lime up to 16 m and fertilizer up to 36 m.The standard version of the spreader is fitted with a mechanical wheel drive that ensures efficient and precise control of the dosage. The wide-angle PTO drive shaft and LED lights are standard as well.

  • Model K-Series - Side Conveyor

    Model K-Series - Side Conveyor

    The side conveyor can be mounted on all spreaders from the Bredal K-Series. The system can be used immediately with a Bredal spreader that has hydraulic driven dosing.The side conveyor, that is mounted across on the backside of the spreader, has a standard lenght of 2,5 m.

  • Bredal  - Model F2 - Rear-Mounted Fertilizer Spreaders

    Bredal - Model F2 - Rear-Mounted Fertilizer Spreaders

    BREDAL's F series consists of rear-mounted fertilizer spreaders with standard working widths from 12 to 36 m.The standard version of the F series comes with a robust, accurate and well recognized mechanical wheel drive to ensure efficient and precise control of the dosage.

  • BREDAL - Model SG series - Multi-Purpose Spreader

    BREDAL - Model SG series - Multi-Purpose Spreader

    BREDAL's SG series is a multi-purpose spreader for lime, fertilizer, sand and salt.Lime and fertilizer are spread up to a working width of 10 m.In the standard SG series the spreading discs and belt speed are adjusted manually, but they are also offered with an LH 500 computer for full control of the spreader from the tractor seat.The SG series is available with tank sizes from 500 to 1500 litres.

Products by FALC srl

  • Rotary Plough

  • Bobland - Model 1900 - Rotary Plough

    Bobland - Model 1900 - Rotary Plough

    Bobland has been developed for deep cultivation of soil intended for vegetables, both in greenhouses and larger outdoor areas. The unique rotating tines of the Bobland allow frequent, deep working of the soil without damaging the soil structure. 2) Bobland is ideal for deep cultivation of light to medium soils, even in very wet conditions. The mixing action of the rotating tines ensures that any manure or fertiliser applied is evenly incorporated...

  • FALCLAND  - Model 3000 - Rotary Plough

    FALCLAND - Model 3000 - Rotary Plough

    The problem of furrows to close is eliminated. The problem of the forming of macrosod is eliminated; the rest of cultivations are mixed in an homogeneous way; the soil is soft. Elimination of a deep compact layer of earth that prevents the penetration of water and roots. Low energy consumption; reduced wear and tear of tyres (zero slipping); towing force is eliminated. Improve of soil's oxygenation and fertility; high working capacity: 33% more than a...

  • Digging Machines

  • PANDA - Model 1000 - Digging Machines

    PANDA - Model 1000 - Digging Machines

    The work of the Mechanical DIGGING MACHINE is the same as old hand digging: penetration, tear, throwing. The DIGGING MACHINE does not cause the formation of a smooth,compacted and impermeable layer as with ploughing. It leaves the ground broken, friable and permeable. Fertility of soil is improved with the DIGGING MACHINE because organic or chemical fertiliser is more fully mixed in the soil; because it encourages the decomposition of harvest...

  • MINI TORO - Digging Machine

    MINI TORO - Digging Machine

    The external flanges (A) are not standard on PANDA- MINI TORO-TOR01500,1700,1800. They can be manufactured on request (excluding PANDA)

  • Power Harrows

  • Fox Vigneron - Model 1000 - Power Harrows

    Fox Vigneron - Model 1000 - Power Harrows

    Tube mm 80x80x6 (inches 3,15x3,15x0,236) for attaching eradicator tines, to remove the compact soil left by tractor's wheels Folding side deflectors to reduce the maximum external width to m 2,99 for m 3, to m 2,49 for m 2,50 Rear clod bar adjustable in height in order to obtain a finer and well levelled sowing bed Facility for hydraulic up and over linkage for sowing machine

  • FOX - Model 2500 and 3000 - Power Harrows

    FOX - Model 2500 and 3000 - Power Harrows

    Protection of the upper bearing: it eliminates possible damages to the main transmission. Double block of the gear (9). Protections to the lower bearings. Protections to the blades screws. Very strong blades with high resistance to the. knocks and to the wear and tear.

  • Rotary Tillers

  • Hydraulic Forklifts

Products by Goldoni S.p.A.

  • Equal Wheel

  • BASE  - Model 20 - Tractor

    BASE - Model 20 - Tractor

    Base 20 is the ideal tractor for the demanding professional user or D.I.Y. enthusiast, people who need a toughly-built yet compact machine that’s also economical to run. Practical to use, Base 20 is an articulated tractor with isodiametric wheels that’s both easy to handle and functional, while being small in size.

  • Euro - Model 30 RS - Tractor

    Euro - Model 30 RS - Tractor

    Thanks to the Euro series of isodiametric four-wheel drive tractors, Goldoni provides an efficacious answer to operators who need an easily handled, agile and stable machine for work on slopes and when there's not much space for manoeuvring. The Euro series includes tractors with power ratings that range from 25 to 38 hp produced in both the steering wheel (RS) and articulated (SN) version, suitable when an even tighter turning radius is required.

  • Euro  - Model 40 RS - Tractor

    Euro - Model 40 RS - Tractor

    Thanks to the Euro series of isodiametric four-wheel drive tractors, Goldoni provides an efficacious answer to operators who need an easily handled, agile and stable machine for work on slopes and when there's not much space for manoeuvring. The Euro series includes tractors with power ratings that range from 25 to 38 hp produced in both the steering wheel (RS) and articulated (SN) version, suitable when an even tighter turning radius is required.

  • Euro  - Model 45 RS/SN - Tractor

    Euro - Model 45 RS/SN - Tractor

    Thanks to the Euro series of isodiametric four-wheel drive tractors, Goldoni provides an efficacious answer to operators who need an easily handled, agile and stable machine for work on slopes and when there's not much space for manoeuvring. The Euro series includes tractors with power ratings that range from 25 to 38 hp produced in both the steering wheel (RS) and articulated (SN) version, suitable when an even tighter turning radius is required.

  • Motocultivators

  • Twist  - Model 5 - Two Wheeled Tractor

    Twist - Model 5 - Two Wheeled Tractor

    Twist is the two-wheeled tractor created by Goldoni to revolutionize the quality of your work, even during your leisure time! Twist is the result of 50 years of experience. Its qualities are the ones that have made Goldoni’s professional machines famous: simplicity, manoeuvrability, safety and exceptional sturdiness. Its potential is infinite. Just turn the handlebars through 180° and you can use all the front-mounted implements, such as:...

  • Specialized 4WD

  • Ronin - Model 40 - Tractor

    Ronin - Model 40 - Tractor

    The new series designed by Goldoni for various specialized uses: from the field, to work among vineyards and orchards, greenhouses and nurseries, to various farming transport operations and finally, in the professional ground care maintenance or municipal use. Ronin is the range designed by Goldoni for a wide variety of specialistic uses: work in the open fields, between the rows of vineyards and orchards, in greenhouses and nurseries as well as all...

  • Ronin  - Model 50 - Tractor

    Ronin - Model 50 - Tractor

    Ronin is the range designed by Goldoni for a wide variety of specialistic uses: work in the open fields, between the rows of vineyards and orchards, in greenhouses and nurseries as well as all the many transport jobs required in farms and for professional ground care. Ronin is the answer for those who need a versatile, multifunction machine that possesses all the strong points of a Goldoni tractor: compact size, sturdiness and reliability.

  • Star  - Model 3050 - Tractor

    Star - Model 3050 - Tractor

    Goldoni's Star 3000 series is the optimum answer to the needs of professional users who work in vineyards and orchards: powerful and easily handled, reliable and able to provide an excellent performance, these tractors are the ideal partners when it comes to working in the often difficult conditions in which specialized crops are cultivated. One of the salient features of the Star 3000 series is its compact size.

Products by Hardi International A/S

  • Hardi Agriiculture Sprayers

  • RANGER  - Trailed Trailer Sprayer

    RANGER - Trailed Trailer Sprayer

    The RANGER is designed to meet the request for a simple and reliable trailer  2500 L. Booms 12 to 24m. Being the smallest in the large HARDI trailer range, the kinship does not fail. The RANGER is designed to meet the request for a simple and reliable trailer. Intelligent tank and frame design ensure stability and strength. Unique components guarantee best performance and ultimate durability. This goal is reached and proven by successful...

  • Hardi  - Model NK - Sprayers

    Hardi - Model NK - Sprayers

    The HARDI NK sprayer is one of the most versatile sprayers ever built. The NK is used by professional plant growers all over the world. It finds its use in traditional farming, horticulture, orchards, vineyards and on grasslands. The NK is a durable and well proven sprayer that offers far more features and options than you would expect from a sprayer in this class.  NK is ideal for spraying small to medium farms and for horticultural...

  • Hardi - Model MASTER plus - Liftmounted Sprayer

    Hardi - Model MASTER plus - Liftmounted Sprayer

    All key functions on the MASTER plus are unsurpassed. The integrated Quick Hitch, the well arranged MANIFOLD fluid system and the versatile boom range are some of the key features making handling a pleasure and spraying efficient. The large range of high quality features makes the MASTER plus a perfect choice for the demands of the moders farmers.With a large range of features, the MASTER plus is the perfect choice for the modern farmer....

  • Navigator  - Trailed Trailer Sprayer

    Navigator - Trailed Trailer Sprayer

    NAVIGATOR is synonymous with high quality and design which supports functionality. Properties which secure the value for money and ease of use. In the HARDI trailer family, NAVIGATOR offers features from midsize to full specifi cation solutions. The large range of high quality features makes the NAVIGATOR the obvious choice.

  • Orchard Mist Blowers

  • ZATURN  - Orchard Mist Blowers

    ZATURN - Orchard Mist Blowers

    Versatile - but uncomplicated, it meets your requirements for optimised small bush or large tree spraying. 1000 to 3000 L up to 55000 m3 air/h

  • JUPITER  - Orchard Mist Blowers

    JUPITER - Orchard Mist Blowers

    Delivers the capacity and air performance for high work rates in intensive orchard and plantation operations. 2000 & 3000 L, up to 85000 m3 air/h

  • Sprayer Components- Nozzles

  • Hardi - Model F-110 - Standard Flat Fan Nozzles

    Hardi - Model F-110 - Standard Flat Fan Nozzles

    All-round flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements).

  • LowDrift  - Nozzles

    LowDrift - Nozzles

    LowDrift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed.

  • MINIDRIFT  - Nozzles

    MINIDRIFT - Nozzles

    The HARDI MINIDRIFT nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

  • INJET  - Nozzle

    INJET - Nozzle

    The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.

  • QUINTASTRREAM  - Nozzle

    QUINTASTRREAM - Nozzle

    Five [5] streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams. HARDI QUINTASTREAM can be mounted using the filter casing without gasket (725737).

  • Hardi - Model F-80 - Flat Fan Nozzle

    Hardi - Model F-80 - Flat Fan Nozzle

    This nozzle has an 80° spray angle. On boom sizes from 24 to 36 m the boom height is often higher than 50 cm above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.

  • DUOCAP - Flat Fan Nozzle

    DUOCAP - Flat Fan Nozzle

    HARDI DUOCAP gives you higher volume rate while still maintaining proper droplet size. Fitted with two Flat Fan or LowDrift nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying. Two different nozzles can be used.A Standard and a MINIDRIFT nozzle will give you the dual benefit of having fine droplets that ensures good coverage in the top of the crop and Coarse droplets that penetrates to the lower and more dense areas....

  • HARDI  - Foam Nozzles

    HARDI - Foam Nozzles

    HARDI foam nozzles are excellent for application of liquid fertilizers. Choose foam nozzles for broad leaf application - the large air inclusion bubbles will be reflected on the leaves and minimize crop damage.

  • Sprayer Components- Controller

  • Hardie - Model 5500  - Controller

    Hardie - Model 5500 - Controller

    HARDI Controller 5500 is more than a basic rate controller. It has many features that will enhance the liquid system on your sprayer and allow you to access more information on the work carried out. How could you work without it?

Products by MASCAR Spa

  • Round Balers

  • Model Corsa    - Round Baler

    Model Corsa - Round Baler

    The Mascar Corsa series is a roundbaler for cylindrical bales with fixed chamber and a chain/bars system, ideal for any type of the product, from those dry to green. Robust, simple, reliable and with contained dimension, it assures low management costs and excellent performance in the difficult conditions.

  • Model Mascar Tuareg CUT series - Round Balers

    Model Mascar Tuareg CUT series - Round Balers

    The Mascar Tuareg series is a roundbaler for the cylindrical bales with fixed chamber and a chain/bars mixed with rolls system, equipped with the excellent technological solutions. It combines the reliability with high performance, thanks also to the rotary feeder system, suitable for the clients who desires productivity together with qaulity. Tuareg is an ideal solution, multiuse for each product type.

  • Mustang    - Model 165  - Round Baler

    Mustang - Model 165 - Round Baler

    MUSTANG 165 variable chamber is the new technological jewel of MASCAR. Besides the innovative design, the new MUSTANG 165 represents important advanced changes in the electronic and hydraulic controls. The harvesting performances are improved thanks to the new pick-up of 225 cm, equipped with the high speed lateral conveyor spirals. An efficient and reliable control unit permits a simple and total electric control of the outside diameter and internal...

  • Monster  - Round Baler

    Monster - Round Baler

    The Mascar Monster series comes up from the experience of who builds roundbalers for years, designed for the most demanding clients. Quality, high productivity and reiability are the main characteristics of Monster. The variable chamber allows to satisfy any requirement, from a farm to an outside contractor. Flexibility, versatility and technology assure performances and quality standard at the highest level.

  • Planters

  • Model Futura - Planter

    Model Futura - Planter

    The precision pneumatic planter FUTURA is the Mascar's interpretation of the traditional seeding element with low sower. Thanks to the notable experience in the planting very good results in strength, simplicity and low maintenance of the machine have been obtained. The opener of the hay-cutter form permits planter use also in humid soils with good stability of the machine and excellent seed distance precision. A particular attention has been paid to...

  • Maxi    - Planter

    Maxi - Planter

    As an answer to the new seeding requirements, Mascar offers the monoseed pneumatic planter MAXI with high sower. A particular care and attention have been paid to the development of 'the machine's heart'. The sower is an expression of speed and high precision in the seed laying, with a special consideration of the reliability, easy utilization and maintenance. The double disc opener guarantees a high performance in any soil condition also in those...

  • Arizona    - Planter

    Arizona - Planter

    Arizona is a mechanical seed rill for cereals and fine seeds. It is fitted with a hopper of big dimension for long seeding range. It has also a continuous gear in oil bath for a precise and fast setting of the seeds quantity. The distributors with sprockets grant a regular and homogeneous distribution of the seeds for all of the rows even on steep slopes. Available in the versions with Suffolks, Suffolk coulters and double disc.

  • Oregon    - Planter

    Oregon - Planter

    The pneumatic seed drill Oregon has as one of the main characteristic, his distribution system made of 4 proportioners having 5 sprockets each. According to the kind of seed you can make a single selection. Each single proportioner is connected to 1 distributor feeding a sowing section between 100 to 150 cm, granting in this way a very uniform quantity on the whole working width.

Products by Badalini Srl

  • Multi-Row Rototillers

  • Model MCn/ CERES - Multi-Row Rototillers

    Model MCn/ CERES - Multi-Row Rototillers

    Many years of experience in the field of multi-row rototillers allowed us to manufacture this model proper for any type of vegetable. The great versatility of the machine allows the work on different cultivations with the same machine. The wide variety of accessories and optionals makes possible to satisfy every own particular needing and necessity, in order to realize a tailor-made machine perfectly suited for every different customer.

  • Model MEn/ ERMES - Multi-Row Rototillers

    Model MEn/ ERMES - Multi-Row Rototillers

    The first multi-row rototiller in the world was planned and patented by Franco Badalini in 1960. The actual models are the evolution of those first machines. This model in particular is suited for work in vegetables, assuring a great reliability. This machine distinguish itself for a great mechanical strongness (it has the hexagonal shaft of 41 mm) and allows to work also in very difficult areas and with very wide working units. In fact it is possible...

  • Inter-Row Cultivators

  • Model SH/SX/ MAIA with Springs - Inter-Row Cultivators

    Model SH/SX/ MAIA with Springs - Inter-Row Cultivators

    Our inter-row cultivators allow to eliminate the use of herbicides, to perform a fast and perfect weeding and to fertilize the crops with precision. All of this happens in only one trail, removing repeated and expensive operations. SH/ are modular and sectional machines, proper for every type of cultivation in rows. They are particularly suitable for difficult and grassy soils. The particular pressure spring keeps the machine on the soil and allows...

  • Model SH/SX/ DIANA - Inter-Row Cultivators With Straight Tines and Discs

    Model SH/SX/ DIANA - Inter-Row Cultivators With Straight Tines and Discs

    The great accuracy we use in the production of our inter-row cultivator allows the machine to work very close to the plant, without any damage for it. The particular pressure spring it is provided with, keeps SH/ on soil and allows the penetration without problems, even in hard situations.

  • Subsoilers

    The employment of BADALINI subsoilers allows to reduce environmental impact, to improve soil characteristics and to get the following advantages: reduced power absorption by the tractor; greater speed and working depth; limproved fuel economy; cost savings in irrigation and drainage; possibility of use in combination with other equipments; reduction of the soil compaction and good levelling of the ground thanks to back discs or roller; reduction of water stagnation on the surface, especially

  • Model CLD/ Rambo Mini - Subsoiler

    Model CLD/ Rambo Mini - Subsoiler

    The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional energy conservation, and the ploughing coat can be broken. This machine, in fact, is manufactured with special and certified materials, in order to reduce the power absorbed by...

  • Model CKA/ King Special - Subsoiler

    Model CKA/ King Special - Subsoiler

    The subsoiler CKA/ KING SPECIAL, in its versions, has been realized after many working experiences in every type of soil. The special arc-frame offers great strongness and solidity; the high clearance under the frame makes easier the passage of the ground at all depths.

  • Rolling Cultivator

    The rolling cultivator RH/ ROMEO allows fast and essential operations for a good work of the soil: - it prepares the bed of seeding, breaking the superficial crust; - after the seeding, it breaks the crust which delays or hinders the birth of the bud; - it oxygenates and it humidifies in uniform way the soil, facilitating the growth of the little plants making them more resistant to the drought. All without any damage for the plants.

  • Model RH/ ROMEO - Rolling Cultivator

    Model RH/ ROMEO - Rolling Cultivator

    Our rolling cultivator RH/ ROMEO is a modular and sectional machine, proper for every type of cultivation in rows. Thanks to its strongness and versatility the model RH/ reaches working speeds from 10 to 20 km/h. This allows to reduce considerably the working costs, allowing rapid interventions on the crops. Despite its speed of job, RH/ ROMEO effectively develops its action without damaging the seedlings, even if they...