IDMC Limited products

Storage tanks in various grades of stainless steel are available in horizontal and vertical designs suitable for indoor or outdoor installations. Tanks are designed and manufactured in flat or conical bottoms and mounted on legs or structures of a similar kind. The tanks can be single walled or insulated.

IDMC supplies a skid-mounted Ultra high temperature (UHT) milk sterilizer, which requires a relatively shorter time for installation and start up. IDMC offers indirect method of UHT heating. The brevity of the treatment makes it possible to achieve very high product quality. This sterilizer is suited for aseptic pouch/other aseptic filling machine or aseptic tank for UHT milk products with a flexibility to connect the homogenizer either for aseptic or non-aseptic applications.

The Fully Indigenous (make in India) Fixed Type Bucket Milking Machine with one /two can cluster assembly consists of a vacuum pumpassembly having a 225 LPMcapacity complete with vacuum tank, regulator, gauge, three vacuum taps, two bends and necessary fittings. The can cluster assembly is complete with one can and can cover, pneumatic pulsatoris set at 70 PPM and have a pulsation ratio of 60:40, 300 cc Flexi Clawmilking unit with vacuum hose, milk hose, twin pulsation tube and short pulsation tube and necessary fittings along with cleaning and disinfecting solutions.

Buffaloes are more difficult to milk than the Holstine or the Jersey cows because they have a very small cisternal fraction of milk and the sphincter muscles guarding the teat cannel are much stronger. It requires a higher vacuum to open the teat canal and empty the teats off milk. An active milk ejection is necessary for milk removal in buffaloes, and this may require stimulation. Milking at high vacuum without milk ejection will suck the teats deep into the milking liners preventing flow of milk and causing considerable stress to the animal. However, if milked at a low vacuum with a lower pulsation rate the tactile stimulation of the milking liners can gently stimulate the buffalo for milk ejection.

The IDMC Milking Cluster FC300B is especially designed for buffaloes with a stainless-steel claw having the possibility to add on extra weight so as to position the milking unit well on the teats and preventing it from riding upwards and thus preventing pulsation failure.

IDMC offers a value to even the smallest farm holder to mechanise his farm with the robust, efficient economic mini milker. The IDMC small capacity low cost “Mini Milker” Bucket Milking Machine is a plug and play device suitable to milk cows in small holder farms with one or two cows but can also be used for milking about 6 to 8 cows in one hour.

IDMC offers Milk-O-Bike, a compact and versatile milking machine that can be powered by electricity or engine. Its milking unit is detachable and portable, allowing the milker to earn extra income by milking anywhere, anytime. It is ideal for small-scale dairy farmers who need a flexible and reliable milking solution.

The bulk milk coolers are used extensively for cooling milk at the collection point, thus maintaining the quality of milk. These are hygienic, easy-to-use, and available in various capacities. Bulk milk coolers are available in direct expansion configuration.

Total Mix Ration (TMR) is a method of feeding dairy cattle, it is an efficient system of delivering nutrients to dairy cattle and buffaloes. The purpose of feeding a TMR diet is that each cow can consume the required level of nutrients in each bite. A cow’s ration should include good quality forages, a balance of grains and proteins, vitamins, and minerals. The IDMC feed mixer wagon mixes the ration cows will eat very well making it convenient to consume a fixed amount of forages and concentrates needed for good production and health while making it harder for cows to be picky while eating. A well-mixed TMR lowers the risk of digestive upset, stabilizes rumen pH and optimizes rumen feed digestion while improving production