IDMC Limited products

The Fully Indigenous (make in India) Fixed Type Bucket Milking Machine with one /two can cluster assembly consists of a vacuum pumpassembly having a 225 LPMcapacity complete with vacuum tank, regulator, gauge, three vacuum taps, two bends and necessary fittings. The can cluster assembly is complete with one can and can cover, pneumatic pulsatoris set at 70 PPM and have a pulsation ratio of 60:40, 300 cc Flexi Clawmilking unit with vacuum hose, milk hose, twin pulsation tube and short pulsation tube and necessary fittings along with cleaning and disinfecting solutions.

Buffaloes are more difficult to milk than the Holstine or the Jersey cows because they have a very small cisternal fraction of milk and the sphincter muscles guarding the teat cannel are much stronger. It requires a higher vacuum to open the teat canal and empty the teats off milk. An active milk ejection is necessary for milk removal in buffaloes, and this may require stimulation. Milking at high vacuum without milk ejection will suck the teats deep into the milking liners preventing flow of milk and causing considerable stress to the animal. However, if milked at a low vacuum with a lower pulsation rate the tactile stimulation of the milking liners can gently stimulate the buffalo for milk ejection.

The IDMC Milking Cluster FC300B is especially designed for buffaloes with a stainless-steel claw having the possibility to add on extra weight so as to position the milking unit well on the teats and preventing it from riding upwards and thus preventing pulsation failure.

IDMC offers a value to even the smallest farm holder to mechanise his farm with the robust, efficient economic mini milker. The IDMC small capacity low cost “Mini Milker” Bucket Milking Machine is a plug and play device suitable to milk cows in small holder farms with one or two cows but can also be used for milking about 6 to 8 cows in one hour.