Johnson Mfg., Inc. products

The models 800RS and 1000RS have Hydraulic Rear Steer that allows the operator to move the blade approximately 3 feet more to the left or the right side of the tractor. All done hydraulically from the tractor seat. These Rear Steer models require a minimum of 2 hydraulic remotes. This rear steer feature allows the HyGrade Grader to clean among bunk lines, feedlot fences, in poulrty barns, around buildings, road edges, trees, etc. without having to drive the tractor so close to the objects that you are working near. The Rear Steer feature gives the grader the capability to clean out drainage or irrigation ditches that are wet, while keeping the tractor on dryer ground. The Rear Steer models are very useful in orchards where reaching under trees is necessary.

The 3 point adapter can save you hundreds of dollars in repair expense, downtime, and unneeded abuse to your pickup when your tractor can easily pull the trailer through the snow, mud or off-road conditions. The 3 point adapter is built heavy-duty for rugged off-road use! Comes complete with a 2 5/16` ball with 1 1/4` shank and 3 hardened pins for your 3 point. Has accommodations for a 1 7/8` ball, 2` ball, or a pin-hitch to pull bumper hitch trailers. The 3 point adapter will also fit Quicktach hitches.

These heavy-duty trailers will haul straight, flex, pick-up, corn, and all-crop heads.

The implement caddy allows you to transport 3 point mounted equipment with your pickup. The caddy will fit most brands of 3 point mounted haying equipment such as mower conditioners, rakes, and etc.

All hydraulic cylinders, hoses, and tips are included. All hydraulic cylinders have nitro steel shafts to withstand element exposure.

All hydraulic cylinders, hoses, and tips are included. All hydraulic cylinders have nitro steel shafts to withstand element exposure. 8′ blade lengths. Blade tilts 15 degrees left and right for slope cuts. Blade angles 40 degrees left and right. Requires one additional remote to operate rear steer functions. All hydraulic functions can operate from one remote. Simply tell us your setup prior to purchase. To operate the functions of blade angle, tilt, and lift, the 800RS comes equipped with one of the two following options.

All hydraulic cylinders, hoses, and tips are included. All hydraulic cylinders have nitro steel shafts to withstand element exposure.

All hydraulic cylinders, hoses, and tips are included. All hydraulic cylinders have nitro steel shafts to withstand element exposure.

All hydraulic cylinders, hoses and tips are included. Requires 3 hydraulic remotes. Dual hydraulic cylinders for blade angle are standard on each model. All hydraulic cylinders have nitro steel shafts to withstand element exposure.

All hydraulic cylinders, hoses and tips are included. Requires 4 hydraulic remotes. Dual hydraulic cylinders for blade angle are standard on each model. All hydraulic cylinders have nitro steel shafts to withstand element exposure.