KSEM, Inc. products

The Feeder Bracket can be added to the end of our larger feeder ends for extra added heavy duty support when connecting Panels and Walk– Through Gates.  The bracket can be turned so the tabs point out  either way.  The bracket can be mounted on the front or the back of the feeder end by sliding a Drop Rod through the tube on the feeder end, and the slots on the backside  of the bracket. Then pin the panel or gate to the tabs on the Feeder Bracket.

Make dividing a large pen into a smaller pen easy by using the Gate Bracket.  The Gate Bracket can be added anywhere along the length of our panels to connect other panels and/or walk-through gates. (Gate Bracket for Horizontal Panels is pictured—Gate Bracket for Vertical Rod Panels is also available.)  The bracket is made up of a flat metal strap as the back and a metal strap with tabs as the front and secures onto the panel with four bolts. Hardware is included with the Gate Bracket.  The front piece, the metal strap with tabs, is sold as an individual piece to be used as a Wall Bracket to bolt onto your barn wall.  The Wall Bracket can be used to pin panels and gates to barn walls instead of using eye screws.  Hardware is not included with Wall Bracket.

Our standard, most basic panel made with 1” square, 16-gauge tubing and feature radius corners for added safety.  Panels have 10” long,   radius cornered feet. 40” tall panels have 6 horizontal bars, 48” tall panels have 7 horizontal bars.  A vertical support is added on panels  measuring 7 foot in length and greater.

All of our equipment items are sold with a set amount of our standard 1/2” x 36” long Zinc Plated Drop Rods included in the price however, extra Drop Rods can be purchased individually or in bundles of 10 rods.  A few select items are sold with 1/2” x 52” extra long Zinc Plated Drop Rods and these can also be purchased individually.  In addition, 3/8” x 36” long Zinc Plated Drop Rods are available if you have other equipment needing a smaller diameter rod.