Morbark, LLC products

Beever M15RX Brush Chipper is ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity chipper is now on a compact, lighter weight design platform. The 8.2 lb., 6″ channel frame rails increases structural strength while maintaining low unit weight. With the powerful TorqMax top feed wheel compression system — the 32.3ci hydraulic motor generates more than 3,400 lb./ft. of material pulling force — and 18″ diameter single top feed wheel with straight flow-through infeed design, the M14R provides powerful and efficient chipping action. Hydra-Lift top feed wheel compression system with spring-assisted down pressure provides more than 1,500 lbs. of material crushing power.

With its power and easily transportable design, Morbark’s compact and economical Beever M12D brush chippers are the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The M12D’s 18″ diameter single top feed wheel with straight flow-through infeed design easily climbs over material, reduces drag and increases chipping efficiency, allowing it to overcome the limitations of comparable disc chippers.

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Beever M12R Brush Chipper is also available tracked for right of way clearing, highway clean-ups and hard-to-reach areas requiring a self-propelled unit for material access. The patented chambered air impeller system increases chip throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck. The direct driven dual feed wheel system with serrated teeth and knife bar combination and end cap ripper teeth allow positive material feeding and reduced material wrapping around the feed wheel shaft for increased feeding efficiency. The M12R is available in a PTO unit for those who have access to a commercial tractor. Like all Morbark equipment, the M12R is a long-lasting, durable machine backed by a world-class parts and service support team.

Our Beever M15R brush chipper is ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class. The powerful TorqMax dual feed wheel compression system generates more than 6,600 lb./ft. of material pulling force. Many customer-inspired innovations are featured on the M15R, increasing efficiency and safety while reducing operating and maintenance costs. Unit is pre-plumbed and outfitted for the easy installation of most aftermarket components. Ergonomic infeed design provides consistent feed control bar activation. Like all Morbark equipment, the M15R is a long-lasting, durable machine backed by a world-class parts and service support team.

While retaining an 18″ chipping capacity, the Beever M18RX Brush Chipper weighs in at less than 10,000 lbs. (GVWR) fully charged with fluids and winch package, eliminating the need for additional transport licensing requirements. Infeed is made with 7-gauge (5 mm), XF-100 sides and 3/8″ (10 mm) thick, XF-100 floor to increase material tensile strength with lighter weight components. Ideal for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities, this chipper combines Morbark strength in a more compact design. Like all Morbark equipment, the M18RX is a long-lasting, durable machine backed by a world-class parts and service support team.

The Beever M18R Brush Chipper boasts a huge list of options to customize the machine as well as more standard features than any other chipper in its class. The unit can be outfitted with a four- or six-cylinder diesel engine and choice of single axle, tandem axle or single axle dual wheel package. With its large capacity and high-production volume reduction capabilities, the Beever M18R Brush Chipper is perfect for residential tree services, vegetation management, lot and land clearing, maintenance contractors and municipalities. The 36″ diameter chambered air impeller system with controllable air flow vents increases chip throwing velocity and easy discharge of light, leafy material. Like all Morbark equipment, the M18R is a long-lasting, durable machine backed by a world-class parts and service support team.

Small but mighty! The Beever M6R Brush Chipper is ideal for rental yards, landscapers, golf courses, pruning crews, orchard maintenance and homeowners, this compact, portable machine provides powerful chipping action. The M6R’s powerful feed system with 23ci hydraulic motor generates more than 2,000 lb./ft. of materials pulling force, while its 66 square inches of infeed throat opening allows for safer feeding and reduced labor for trimming.

Perfect for rental yards, landscapers, golf courses and pruning crews, the high-capacity Beever M8D Brush Chipper is easy to transport and operate. Plus, it’s the only chipper in its class to combine both a wide infeed chute opening and 1 1/4″ thick chipping disc for a greater chipping capacity than comparable models. The M8D has a 251-pound disc and shaft weight, which provides more inertia to power through material and continuously feed material. With a single top feed wheel compression system and 32.3 ci hydraulic motor with spring-assisted down pressure, the M8D generates more than 2,300 lb./ft. of material pulling force and approximately 1,000 lb./ft. of combined down pressure to easily feed a variety of materials. Like all Morbark equipment, the M8D is a long-lasting, durable machine backed by a world-class parts and service support team.

With its power and easily transportable design, the compact and economical Beever M12RX chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck. The 18″ diameter single top feed wheel easily climbs over material, reduces drag and increases chipping efficiency. Like all Morbark equipment, the M12RX is a long-lasting, durable machine backed by a world-class parts and service support team.