Mulmix S.p.a. products

The flat bottom grain silos (FP series) is used for the storage of granular cereals with maximum apparent density of 0.85 t/m3. It is installed on a concrete base in which ventilation channels can be obtained. In the storage flat bottom grain bins loading is performed through the central dome both by means of pipes and conveyor devices positioned on dedicated gangways. Silo unloading is done by means of mechanical conveyor devices positioned both in the subterranean tunnels or in the channels obtained in the base. In silos of greater size and height, side unloading channels can be fitted (usually installed on the 10th ring) for partial silo unloading without the need for mechanical devices.

The 45°and 60° metal hopper silos model CI are used in mills, in feed mills and in storage plants where the complete emptying of silos is necessary but it should be performed without the aid of mechanical conveyors or operators. They can be even used to store products with difficult flowing since the hopper facilitates it. The discharge cone is made of Z600 galvanized sheet. CI silos are available in many versions, from 120 to 2400 m2. By the way other sizes can be easily required. The silo is designed in compliance with EUROCODE EN-1991-4 standards.

The quick loading silos (CR series) are used for loading means of transport such as trucks and trains. The cereal is loaded in the silos at the rate provided by the conveyor devices in the plant and unloaded by means of gravity through an automatic or manual shutter positioned at approximately 4.2 meters off the ground. The use of a quick loading CR silo speeds up vehicle loading, making the cereal always available for delivery including without the use of mechanical devices.

The DRY-MX grain series dryers are used for the drying of cereals and oilseeds in order to improve their storage and conservation quality.
The product is loaded in the upper part of the dryer, descends by means of gravity through the drying column and loses humidity until reaching the desired parameters. The particular geometry of the ducts in which the product flows and the pulse outlet guarantee a homogeneous flow and a continuous product mixing.