OPICO Limited

32 products found

products

  • OPICO Machinery - Grain Dryers

  • OPICO - Model 355 XL - Gas Grain Dryers

    OPICO - Model 355 XL - Gas Grain Dryers

    Why get caught out by another wet harvest when OPICO's Grain Dryers have the solution. Easy to install and relocate when necessary, OPICO Grain Dryers do not require vast expenditure on handling equipment and our Gas Grain Dryers can easily dry up to 168 tons per day automatically, with minimal supervision. Using gas with 3 phase or PTO drive OPICO dryers recirculate the grain constantly to dry thoroughly and consistently...

  • OPICO - Model 395QF 9 Ton - Gas Grain Dryer

    OPICO - Model 395QF 9 Ton - Gas Grain Dryer

    9 ton approximate holding capacity. 4½ ton per hour throughput. Digital Controls. Quiet Fan (74Db). Supplied as standard with 33' custom-built, in-line centrifugal fan (74 dba). 8' diameter loading auger (50 ton an hour loading capacity). Full length 9ft 10' (3m) loading hopper. 60 ton an hour 12' diameter central auger. Centralised greaser location. Epoxy powder coated outside sheets. Adjustable screw jacks....

  • OPICO - Model 120 Eco - 12 Ton - Diesel Grain Dryer

    OPICO - Model 120 Eco - 12 Ton - Diesel Grain Dryer

    The New Magna 120 Eco is a base spec Dryer designed to give an affordable 12 ton holding capacity Dryer whilst still offering the clean burn, fuel saving technology like the rest of the magna range. Its Duax heat core retains and builds up heat ensuring a more even temperature and a clean burn. The 120's fixed screens allow even quicker setup and make it a easily mobile Dryer. Stainless steel perforated screens, 1.5mm on the outside and 2.5mm on the...

  • OPICO - Model 1200QF - 12 Ton - Diesel Grain Dryer

    OPICO - Model 1200QF - 12 Ton - Diesel Grain Dryer

    The OPICO range of Magna dryers are specifically designed with UK farmers' crops and needs in mind. The 1200QF provides efficient, clean, diesel fired drying and ease of transport. Both models use a large cross-flow centrifugal fan which is quiet and powerful. The Magna range has all the benefits of true re-circulation, better sample, improved hectolitre weight and ease of management The Eco-Flo diesel burner gives a semi-indirect burn to ensure it is...

  • OPICO - Model 1200QF - 12 Ton - Automatic Diesel Grain Dryer

    OPICO - Model 1200QF - 12 Ton - Automatic Diesel Grain Dryer

    This 1200QF Auto Electric dryer is able to load, dry, cool and unload completely automatically allowing unattended drying hour after hour. The OPICO range of Magna dryers are specifically designed with UK farmers' crops and needs in mind. Providing efficient, clean, diesel fired drying these fully automated models can be set up in conjunction with a wet holding bin and will load, dry, cool and unload automatically giving unattended drying hour...

  • OPICO Machinery - Arable Equipment

  • OPICO - Model Micro Pro 16 - Granules

    OPICO - Model Micro Pro 16 - Granules

    The Micro-Pro 16 has been developed to enable accurate application of Micro Granules such as Avadex up to 12m working widths when mounted on a variety of implements. It has 16 outlets giving a spacing of 75cm between outlets for a robust double overlapping spread pattern. Each outlet is fed by an individual metering roller ensuring even Micro granule distribution across the entire working width.

  • Variocast - Model 8 - Seeder

    Variocast - Model 8 - Seeder

    Low cost seeding with your cultivation equipment, the Variocast Seeder can be mounted on any type of implement and used for sowing crops such as rape, stubble turnips, kale and other small seeds as well as distributing slug pellets. Being ground wheel driven it maintains a consistent seedrate whatever speed the implement is working at. Drive is taken from the spoked land wheel and transmitted through a 12mm flexible drive cable to a variator gearbox....

  • OPICO Machinery - Grassland Machinery

  • OPICO - Model Air 8 - Grass Seeders

    OPICO - Model Air 8 - Grass Seeders

    Whether you are over-seeding or re-seeding pastures OPICO have a seeder to suit the job. The AIR 8 seeder is designed to fit directly onto an OPICO Grass Harrow. The seeder accurately meters and distributes the seed evenly across the width of the machine whilst the Grass Harrow opens up the soil and creates a tilth and then covers in the seed...

  • OPICO - Model Air 8E - Grass Seeders

    OPICO - Model Air 8E - Grass Seeders

    The Air 8 (E) Electronic uses the electronic control as standard with a motor to drive the metering mechanism and twin electric fans to distribute the seed through its 8 outlets on machines up to 6.5m wide.

  • OPICO Machinery - Earth Drills

Products by HE-VA ApS

  • Front Mounted Equipment

  • Front Pakker

    Front Pakker

    HE-VA Front-Pakker is the ideal solution to level and consolidate new ploughed soils. Thanks to HE-VA's unique ring profile, which HE-VA has developed over the years, an excellent cutting action is achieved whilst having the weight to consolidate in front of a harrow / drill combination. 1.5, 1.65, 2.6, 3.0, 3.5 and 4.0 m working widths are available as rigid machines and 4.0, 5.0 and 6.0 m machines with hydraulic folding into a...

  • Front-Tiller Harrow

    Front-Tiller Harrow

    HE-VA Front-Tiller is a front harrow with two harrow sections with up to 300 mm working depth. HE-VA Front-Tiller can be combined with a stubble implement or a drill unit - mounted behind the tractor, resulting in an optimal utilization of the tractor. The strong tines with mechanical spring release - preloaded for 455 kg - ensure that the Front-Tiller is an effective machine for soil loosening  in connection with seed bed...

  • Seedbed Harrows

  • Kulti-Dan - Flexible Seedbed Harrow

    Kulti-Dan - Flexible Seedbed Harrow

    Flexible seedbed harrow in working widths from 2.2 - 6.4 m. The Kulti-Dan is mounted with 4 rows of 10x32 mm tines with a tine row distance of 40 cm which will allow trash and stones to pass through. The tine angle can easily be adjusted in 4 different positions depending on soil type and working duty. The large 600x12 wheels ensure the depth accuracy to be most exact and the depth is easily and quickly adjusted by the handle equipped with...

  • Euro-Dan Eco - Trailed Seedbed Harrow

    Euro-Dan Eco - Trailed Seedbed Harrow

    Euro-Dan Eco trailed seedbed harrow is available in 5-8 m working widths. The keywords for Euro-Dan Eco are large capacity and flexibility with the possibility to mount equipment optimizing the field work for any farm. Euro-Dan  Eco has the necessary weight and is equipped with all the necessary tools to prepare even the most heavy clay soil. The large depth wheels ensure a precise harrow depth...

  • Harrow and Drill Combinations

  • Model VF Series - Combi Seeder

    Model VF Series - Combi Seeder

    Reliable seed drill with roller in front of seed coulters. Combi-Seeder VF is a strong sturdy harrow-drill combination in 3 and 4 m working widths, which are available with towage coulters or disc coulters. The 3 m models are available with 1000 l seed hoppers and 4 m models are available with 1400 l seed hoppers. The frame is performed as a welded grated construction with high strength. Effective soil preparation via 3...

  • Terra - Seeder

    Terra - Seeder

    3.00, 4.00, 5.00 and 6.00 m mounted air seeders with 2 centre suspended sections (not 3 m rigid model) ensuring flexible construction and a total contour following of the field. 3 rows of harrow tines with 3 different optional roller types - depending on the soil type. In front the Terra-Seeder is mounted with Spring-Board levelling bar, which guarantees an excellent levelling effect, and clods are crushed effectively. The...

  • Rollers

  • Lift Roller

    Lift Roller

    HE-VA Lift-Roller is a three-point mounted roller which is available in working widths of 2.6 and 3.0 m. The Lift-Roller's compact construction with the weight close to the tractor makes is easy to operate even with smaller tractors. The bottom link arms carry a connection bar, which has free movement enabling the Lift-Roller to follow field contours eliminating any possibility of strain on the frame. HE-VA...

  • Tip-Roller

    Tip-Roller

    HE-VA Tip-Roller is more than an ordinary roller. Don´t just roll - cultivate, level and consolidate. With the different combination possibilities HE-VAs Tip-Roller with working widths from 4.5 m to 10.2 m can fulfill all requirements for better efficiency regardless of soil area or soil conditions. HE-VA Tip-Roller is a 3 section roller built up with centre pivoting wing section, ensuring an effective soil...

  • Sub-Soilers

  • Model MKI - Combi-Tiller Sub-Soilers

    Model MKI - Combi-Tiller Sub-Soilers

    HE-VA Combi-Tiller is a sub-soiler developed for working solo or in combination with a following implement. Soil loosening together with e.g. stubble preparation or seeding in one pass, the big tractors' effect is used optimally. Moreover, you benefit from the soil loosening, as the field is not exposed to a following operation. The Combi-Tiller is able to work from -50 mm to max. 300 mm depth with its 200 mm wide wing share point.

  • Fine Seed Equipment

  • Multi-Seede

    Multi-Seede

    HE-VA Multi-Seeder is a pneumatic fine seeder which easily and quickly can be mounted on nearly all types of implements such as rollers, seed drills, stubble implements etc. regardless of the make. Multi-Seeder is excellent for many different seed types such as rape, grass mixtures, cover crops, fertilizer etc. and is available with 200 l, 410 l, 660 l or 850 l seed hopper. A spoked land wheel or Auto-Controller provides ground speed...

  • Round Bale Unwinder

  • Three-Point Mounted Round Bale Unwinder

    Three-Point Mounted Round Bale Unwinder

    The three-point mounted round bale unwinder Rondo-Dan is epecially suitable for dustless feeding of straw and for laying out in the large barns as well. Rondo-Dan can work with round bales of straw, hay, silage and similar materials with a max. diameter of 180 cm and with a max. round bale weight of 850 kg. The 2 three-point mounted bale spears of the Rondo-Don collect the bale and place it on the unwinder...

  • Weeder

  • Weeder

    Weeder

    HE-VA Weeder is available in 5 different models with working widths of 3.0 m, 4.5 m, 6.0 m, 7.5 m, 9.0 m or 12.0 m. HE-VA Weeder is designed for weeding in grain, rape, beets and potatoes and for grassland aeration. Constructed with 1.5 m wide free-floating harrow sections, the HE-VA Weeder adapts perfectly to all landscapes. Each section has 5 rows of double tines and with a tine spacing of 2.5...

Products by B. Strautmann & Söhne GmbH u. Co. KG

  • Picking-up Technology

  • Model GS - Silage Buckets

    Model GS - Silage Buckets

    The bucket can be used to pick up both silage and bulk materials without any problems. The robust design with a scraping edge made of Hardox ensures a long service life. The tines of the toothed bar which are pointed on four sides enable easy penetration of solid silage.

  • Block / Fodder Distribution Wagon

  • Model BVW - Block Distribution Wagon

    Model BVW - Block Distribution Wagon

    The block distribution wagon (BVW) can be used to benefit from the advantages of the removal of stocks. If you store the silo blocks outside the stable on a paved surface, they can be picked up there and distributed in the stable by means of the BVW. Thus, the BVW closes the gap within the mechanisation chain between silo and trough. The block distribution wagon enables clean picking-up of silage blocks picked-up as a reserve, and their transport...

  • Model FVW - Fodder Distribution Wagon

    Model FVW - Fodder Distribution Wagon

    Four different sizes, from 10 - 16 m3, are available. Whether equipped with front or rear distribution unit, all FVW models offer optimum distribution of the fodder in the stable. Due to the use of an additional mixing and dosing drum (optional equipment on the models FVW 100 / 100 H and 120 / 120 H), a mixing of the components can be reached when charging in layers.

  • Fodder Mixing Wagon

  • Verti-Mix - Model 400 / 500 - Fodder Mixing Wagon

    Verti-Mix - Model 400 / 500 - Fodder Mixing Wagon

    The Verti-Mix 400 / 500 series is the ideal opportunity for agricultural businesses to start cattle-friendly TMR-feeding. Particular importance was attached to compact dimensions and low-cost design when designing these fodder mixing wagons while maintaining proven reliability. This is why it is an ideal option to start TMR-feeding in particular for smaller businesses with restricted yard space.

  • Verti-Mix  - Model VM - Fodder Mixing Wagon

    Verti-Mix - Model VM - Fodder Mixing Wagon

    The patented container embossing at the top container edge provides the Strautmann mixing container with additional rigidity. It serves as basis for variable container attachments helping you to adapt the capacity of the mixing container to your operational requirements. Be among those who benefit from our more than 20 years of experience in fodder mixing technology and become one of our approx. 20,000 reference businesses!

  • Verti-Mix - Model L  - Fodder Mixing Wagon

    Verti-Mix - Model L - Fodder Mixing Wagon

    The patented container embossing at the top container edge provides the Strautmann mixing container with additional rigidity. It serves as basis for variable container attachments helping you to adapt the capacity of the mixing container to your operational requirements. Be among those who benefit from our more than 20 years of experience in fodder mixing technology and become one of our approx. 20,000 reference businesses!

  • Manure Spreader

  • Model BE 4  - Manure Spreader

    Model BE 4 - Manure Spreader

    The outstanding feature of the Strautmann spreaders is their perfection down to the last detail. Due to decades of experience in manufacturing spreaders and high quality awareness, the Strautmann spreaders are among the best in their classes.

  • Model MS 1201-1401  - Manure Spreader

    Model MS 1201-1401 - Manure Spreader

    The MS spreader series represents the advanced development of the proven BE spreader models. With the all-steel trough now being powder-coated, the MS spreader models are a perfect complement to the Strautmann spreader portfolio. Solid spreading units with a high level of distribution accuracy ensure great operational safety and long service life.