Precision Husky Corporation products

The canted side spout design and the position of the knife causes a smooth slicing action. The attack angle of the knife gives a gentle lift to the slab as the knife passes the center line and begins the upward swing turning the slab counterclockwise. The spout has a flat bottom and canted side to give 25% more anvil contact, preventing slapping and wood turning in the wrong direction. Horizontal and vertical anvils give additional life, requiring less maintenance. Both anvils are hard surfaced with colmonoy with a hardness of 62-65, Rockwell C scale. With a four-sided replaceable anvil, maintenance and time are saved. Less horsepower is needed with Precision’s smoother slicing action.

Precision`s spout design with a flat bottom and canted side gives 25% more anvil contact with the log. This provides absolute control of the log, preventing slapping and wood turning. Both horizontal and vertical anvils give additional life with less maintenance. Both are hard surfaced with colmonoy which has a hardness of 62 to 65 on the Rockwell C scale.

Steel cutterheads are heavy duty reinforced steel cylinders with welded depth rings and bolt on cutter bit holders. Depth rings prevent excessive fiber removal and damage to head.

All controls are housed in a NEMA #12 water-tight control box. The operational controls are mounted on the side of the control panel for additional safety. An electrical lock out utilizing a key prohibits any motor function during loading or maintenance. Precision Rotary Knife Grinder’s anti -friction bearings with continuous circular grinding eliminates the reversal vibration shock commonly experienced in reciprocating grinders. Any size knife can be ground from 3⁄16” to 1-1⁄4” [5mm to 32mm] thick and knife widths from 2” to 6” [51mm to 152mm]. Accommodates knives from 5” to 28” [127mm to 711mm] long. The low height of this compact grinder makes loading and unloading knives easier. Precision’s Rotary Knife Grinder is complete, ready to use with diamond wheel dresser, bevel gauge for setting fixtures, coolant pump and tank, and all motors and starters.

Drum Chipper: Transport-length: 34’-10” [10.61m]. Transport-height: 13’ [3.96m]. Weight: 45,000 lbs. [20,455kg]. Axle-weight: 30,000 lbs. [13,636kg]. Tongue-weight: 15,000 lbs. [6,819kg]. Width: 9’-10” [2.99m].

All four sizes of Precision Whole Tree Chippers have rugged frame construction, over-sized stabilizers, air compressors, trash separators and more powerful fans that pack more chips per van. Power options range from 400 to 1050 horsepower [298 to 783 kw]. Because Precision Whole Tree Chippers are built stronger, have more standard features, with a reputation of trouble-free service, it is the choice of experienced operators and owners.

The Precision FD-2300, 2 Flail capable of processing multiple logs from 3” to 23” [76mm to 584mm] and FD-2600-4 flail, capable of processing multiple logs from 3” to 26” [76mm to 660mm] increase productivity while reducing bark content to as low as 3/10 of 1% on average. The fully adjustable hydraulic system provides the operator limitless control of the feed rate,flail speeds and rotations. This flexibility offers many solutions to the customer’s individual needs and maintains the highest efficiency rates possible.

The Husky XL series is engineered to be highly responsive with a smooth powerful swing with perfect balance. They are the heaviest built in the industry and outweigh the competitor’s model for model. Routine service is fast with an easy access design, like centralized hydraulic pressure checks, turntable bearing greasing from the operator’s cab. Husky boasts the largest steel booms available with super heavy-duty sub frames. Husky owners know they are built to last. The Husky XL-175 weighs in at 18,000 lbs; it has a lift capacity of nearly 9 tons at ten feet and over 3 tons at full extension. Even more improvements have been made to the XL series including new cylinder design, improved operator’s cab and hydraulics for cooler operation.