Precision Husky Corporation products

The canted side spout design and the position of the knife causes a smooth slicing action. The attack angle of the knife gives a gentle lift to the slab as the knife passes the center line and begins the upward swing turning the slab counterclockwise. The spout has a flat bottom and canted side to give 25% more anvil contact, preventing slapping and wood turning in the wrong direction. Horizontal and vertical anvils give additional life, requiring less maintenance. Both anvils are hard surfaced with colmonoy with a hardness of 62-65, Rockwell C scale. With a four-sided replaceable anvil, maintenance and time are saved. Less horsepower is needed with Precision’s smoother slicing action.

Precision`s spout design with a flat bottom and canted side gives 25% more anvil contact with the log. This provides absolute control of the log, preventing slapping and wood turning. Both horizontal and vertical anvils give additional life with less maintenance. Both are hard surfaced with colmonoy which has a hardness of 62 to 65 on the Rockwell C scale.

Steel cutterheads are heavy duty reinforced steel cylinders with welded depth rings and bolt on cutter bit holders. Depth rings prevent excessive fiber removal and damage to head.

All controls are housed in a NEMA #12 water-tight control box. The operational controls are mounted on the side of the control panel for additional safety. An electrical lock out utilizing a key prohibits any motor function during loading or maintenance. Precision Rotary Knife Grinder’s anti -friction bearings with continuous circular grinding eliminates the reversal vibration shock commonly experienced in reciprocating grinders. Any size knife can be ground from 3⁄16” to 1-1⁄4” [5mm to 32mm] thick and knife widths from 2” to 6” [51mm to 152mm]. Accommodates knives from 5” to 28” [127mm to 711mm] long. The low height of this compact grinder makes loading and unloading knives easier. Precision’s Rotary Knife Grinder is complete, ready to use with diamond wheel dresser, bevel gauge for setting fixtures, coolant pump and tank, and all motors and starters.