Protekta Inc.

17 products found

products

  • Dumper

    Dumper

    The Bobman Dumper will handle heavy loads and protect the surface. Even when the Bobman Dumper is loaded with soil or broken brick, the wide tires with tread for grass will protect the surface.

  • Feedturner

    Feedturner

    The feed turner turns and moves feed back to the feeding table quickly and efficiently. The work is done from the operator's seat and in one run. Feeding table for 200 cows will take less than three minutes.   The standard length of the feed turner is 110 cm, but can be changed at your request.   The feed turner is mounted on the Bobman in just a few seconds.

Products by Jydeland Maskinfabrik A/S

  • Jydeland Bobman Bedding Equipment

  • Jydeland Bobman - Model S - Bedding Machine

    Jydeland Bobman - Model S - Bedding Machine

    3-in-1 – The BOBMAN bedding machines scrape the slats, sweep the stalls and spread an even layer of bedding all in only one pass!. Increases farming efficiency. Can help to reduce somatic cell count. Can help to prevent mastitis. The BOBMAN spreaders make regular cleaning and maintenance work easy. Using the BOBMAN on a regular basis will improve hygiene in the cow housing, prevent diseases and maintain good health and well-being of the cows,...

  • Jydeland Bobman - Model FL  - Self Loading Bedding Machine

    Jydeland Bobman - Model FL - Self Loading Bedding Machine

    3-in-1 – The BOBMAN bedding machines scrape the slats, sweep the stalls and spread an even layer of bedding all in only one pass!.  Reduces the time taken to load and apply bedding to the stall beds. Reduces the time taken to clean out the stalls or the milking cubicles. Can help to reduce somatic cell count. Can help to prevent mastitis. The BOBMAN spreaders make regular cleaning and maintenance work easy. Using the BOBMAN on a regular...

  • Jydeland Bobman - Model SL  - Self Loading Bedding Machine

    Jydeland Bobman - Model SL - Self Loading Bedding Machine

    4-in-1 – Sweeping the stalls, scraping the floor and spreading the straws with disinfectant for 1000 dairy cows will take less than 20 minutes!. Reduces somatic cell count. The BOBMAN spreaders make regular cleaning and maintenance work easy. Using the BOBMAN on a regular basis will improve hygiene in the cow housing, prevent diseases and maintain good health and well-being of the cows, leading to high volume and quality milk. Time and labour...

  • Jydeland Bobman COMFORT  - Soft Bedding Machine

    Jydeland Bobman COMFORT - Soft Bedding Machine

    The BOBMAN COMFORT is a specifically designed bedding machine for applying separated manure solids (green bedding) or a mix of chopped straw, lime and water in livestock stalls. The BOBMAN COMFORT can also be used for applying inorganic bedding, such as hydrated lime or pulverized gypsum in livestock stalls.

  • Jydeland Bobman - Mini Self-Propelled Mixing Feeder-Bedder

    Jydeland Bobman - Mini Self-Propelled Mixing Feeder-Bedder

    Mini self-propelled mixing feeder-bedder for smaller herds. The BOBMAN Feeder is designed for efficient distribution of a well mixed ration. The BOBMAN Feeder has 600 l capacity. Using the BOBMAN FEEDER will improve feeding efficiency and eliminate heavy manual labor. The BOBMAN FEEDER can also be used as a bedder for adding recycled manure solids or mixed chopped straw mixed with lime and water into deep bedded cow stalls.

  • Tool Carriers

Products by KVK Hydra Klov

  • Hoof Trimming Chute and Lead-in Pen

  • Model 650-SP 0 - Hoof Trimming Chute

    Model 650-SP 0 - Hoof Trimming Chute

    Both models are built to accommodate livestock weighing 200–900 kg. They are engineered to provide optimum comfort for livestock during trimming. The models operate at low noise levels and are easy to maintain. These chutes are the ideal solution, meeting the highest standards for fast and efficient hoof trimming..

  • Model 800-1 - Hoof Trimming Chute

    Model 800-1 - Hoof Trimming Chute

    The Model 800-1 hoof trimming chute is the ideal solution, meeting the highest standards for fast and efficient hoof trimming. On the basis of our 30 years’ experience in the manufacture of hoof trimming chutes, this product is designed to meet current and future requirements. Special attention has been paid to ensuring reliable operation and solid construction. Model 800-1 is built to accommodate livestock weighing 200-900 kg. It is engineered...

  • Model 500-0 og 500-1 - Lead-in Pen

    Model 500-0 og 500-1 - Lead-in Pen

    Model 500-0 includes a hand pump to hoist the chute onto its wheels. This model also features a crane hook to facilitate loading and unloading. Model 500-1 features an electric/hydraulic pump to hoist the chute onto its wheels and to load the lead-in pen on and off the truck bed using the front windlass.

  • Model 650 SP 2 - Hoof Trimming Chute

    Model 650 SP 2 - Hoof Trimming Chute

    Hydraulic harness hoist. Hydraulic lift adjusts chute working height. Hydraulic functions are moderated to eliminate the risk of injury to the animal. Hot-dip galvanized frame. The unit is fitted with efficient working lights. Hydraulic adjustment of all 4 supporting legs

  • Model 200-0 - Lead-in Pen

    Model 200-0 - Lead-in Pen

    Our lead-in pen 200-0 is made of aluminum and are therefore very easy to handle during setup. The lead-in pen can be expanded with an unlimited number of additional gates, which incidentally can also be used for other purposes.

  • Trailers

  • ANSSEM - Model MSX3000 - Trailers

    ANSSEM - Model MSX3000 - Trailers

    The trailer is supplied with windlass (as illustrated), aluminium truck bed, front supporting wheels and ramps. ANSSEM-MSX3000 a good, simple and stable trailer with ramps. Ramp storage under truck bed.

  • HUMBAUR  - Model HUT 3000 - Trailer

    HUMBAUR - Model HUT 3000 - Trailer

    HUMBAUR Model HUT 3000. A robust trailer with aluminium base, hydraulic tipper, windlass and front wheel. Truck bed dimensions: 430x210x20 cm. Total weight: 3000 kg.  Max.load: 2200 kg.