Riegos Ruiz products

The pyramidal structure formed by angular profiles of galvanized steel and the anchoring by bolts to the square platform of reinforced concrete give the central pivot a great robustness to be able to withstand the rotating movements of the machine. The pivot is supplied with water through a riser and an elbow, both in galvanized steel 8 5/8 "(219 mm) in diameter. It has a 13-way collector, exterior and with access ladder to it. The standard free height of this machine is 3.30 m, and can reach 4.10 m in the extra tall model.

Designed to irrigate in 2, 3, 4 or more places without requiring a tractor to change position. The central rotating car has two driving wheels, which are used for circular operation or for its transfer, and this is done by turning said wheels 90 ° once the car is lifted with the hydraulic group installed in it.

Standard front systems are suitable for watering rectangular or square surfaces, due to their linear movement. The car is mounted on 2 or 4 driving wheels and is fed by a hose that connects to one or more hydrants, depending on the size of the plot and the flow to be provided. The alignment system is carried out by means of a groove or a cable with probes.

Pivot irrigation systems are units equipped with wings of rain. Each system is individually designed depending of land to be irrigated. The pressure required for the functioning of the pumping unit is provided, usually equipped with filtration.

The Side System with Channel Feed is fed directly from a level channel. A motor pump group is installed on the 4-wheel car that sucks and drives the required flow. There are two versions: electric or diesel. In the first case, a surface electric cable is required that provides us with the energy necessary for its operation; and in the case of diesel, a generator set would be required to supply power to the pump and the entire system (geared motors, ...).

The Hypodromous Systems are designed to irrigate square, rectangular or trapezoidal plots, allowing the rotation by pivoting at one or several points, watering in turn when necessary, without the need to anchor the central carriage. The structure of a pivot is mounted on the 4-wheel carriage, supplying water with a hose to the riser and elbow, both in galvanized steel of 219 mm in diameter. It has a 13-way collector, exterior and with access ladder to it.