Rome Plow Company, LLC products

For use with tractors in the 30 – 114hp range.

Wheel Offset Disk Harrow: For use with tractors in the 84 – 193hp range.

Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. High gang carrier design to prevent trash build up and clogging. Levels, cuts, and mixes to full working depth. Combines ease of maneuverability with high strength for the most adverse conditions. Up to 277lbs (126kg) of weight per disk blade depending on model with an average of 240lbs (109kg).   Up to 9” (229mm) maximum depth of penetration with standard 26” (660mm) diameter disk blades. Equipped with Timken dual tapered roller bearings. Adjustable disk blade scrapers. Dual purpose transport unit for transportability and penetration control.

Heavy Duty Ejector Scraper: For use with tractors in the 360 – 600hp range.

Pivot Dump Carry-All Scraper: For use with tractors in the 225 - 400hp range.

Heavy Duty Ejector Scraper: For use with tractors in the 375 - 600 hp range.

Compatible with any make and model motor grader. Economically dress road shoulders; construct and maintain ditches; shape banks on cuts and fills; and numerous other sloping and leveling operations. Heavy-duty 16` (4.9m) long x 3/4` (19mm) thick x 20` (508mm) wide moldboard blade made from high strength steel with replaceable cutting edges and end bits. Full hydraulic control from motor grader seat allows operation completely independent of the standard motor grader blade. Available with a fixed or sliding mount with 32` (813mm) side shift. Single stage pull bar allows for an 80° sloping range. Two stage pull bar allows for a 130° sloping range. Sloping angle hydraulically controlled from 60° up to 60° down. Hydraulically controlled heel lift with 24` (610mm) vertical range. 25° blade pitch adjustment.

Mainframe constructed of tough, high-strength 7` (178mm) x 7` (178mm) x 3/8` (1 Omm) welded rectangular tubing. Up to 24` (610mm) maximum depth of penetration. Bolt-on shanks and coulters permit quick changes in spacing when desirable. Deep soil mulching action reduces water erosion and helps the farmer field produce the highest yield possible while complying with today`s strict conservation and erosion regulations.
Keeps moist soil beneath the surface and away from the sun and wind. Provides a deep, clean `slice` that breaks up hardpan to increase water intake, reduce water runoff and enhance root structure environment for  superior crop growth-Shear bolt protection-Gauge wheels assure accurate penetration control in shallow or deep applications. Fits the Three Point Hitch - Category III, 4-N to make transportation between jobs easier.

Deep soil mulching action reduces water erosion and helps farmers produce the highest yield possible while complying with today`s strict conservation and erosion regulations. Provides a deep, clean `slice` that breaks up hardpan to increase water intake, reduce run off and enhance root structure environment for superior crop growth-Keeps moist soil beneath the surface and away from the sun and wind. Mainframe constructed of high strength 7` (178mm) x 7` (178mm) x 3/8` (10mm) welded square tubing-Bolt on shanks and coulters permit quick changes in spacing when desirable. Shanks are shear bolt protected. Up to 32` (813mm) maximum depth of penetration. Gauge wheels assure accurate penetration control in shallow or deep applications. Available for category II, III, and IV three point hitches.

Breaks up hardpan, aids in root penetration, and decreases water runoff. Main Frame is constructed of tough, high strength 7` (178mm) x 7` (178mm) x 1/2` (13mm) steel for maximum durability. Maximum penetration depth up to 19` (483mm). Available with 24` (610mm) or 30` (762mm) shank spacing. Gauge wheels equipped with turnbuckles for accurate depth control. Wheel hubs equipped with tapered roller bearings.
Three point hitch allows for easy transportation between jobs. Compatible with any three point hitch configuration.