TORNUM AB

11 products found

products

  • Drying

  • Intake

  • Model TGS - Intake Pit

    Model TGS - Intake Pit

    TORNUM’s intake pit TGS has a large volume despite its shallow depth. The pit has a smooth interior for good hygiene and minimal cleaning. The intake pit TGS is suitable for chain conveyors up to 400 tons per hour and is intended for installation in a culvert.

  • Bucket and Chain Elevator Pit

    Bucket and Chain Elevator Pit

    TORNUM’s bucket and chain elevator pits are self-discharging. The function is based on the receiving section being emptied to the elevator by the natural drop. Both are suitable for permanent embedding in a concrete base. The large depth of the bucket elevator pit is often an advantage, as the natural drop can also be used from the bins and dryer to the elevator. The receiving section of the chain elevator pit can be closed with a shutter so...

  • Receiving Hopper

    Receiving Hopper

    TORNUM’s receiving hopper has been developed to meet market demands for a simple system for receiving grain from carts. It is placed above ground, minimising the need for construction and groundworks. It comes in four different sizes, with the height of the hopper being variable. However, the width is fixed at 4.5 m. The capacity of the conveyor at the bottom of the hopper is optional between 30 tons/h and 120 tons/h.

  • Model TK - Continuous Mixed Flow Dryer

    Model TK - Continuous Mixed Flow Dryer

    TORNUM’s continuous mixed flow dryer TK is designed to provide the best heating economy and a gentle drying of grain. A high level of quality along with design solutions that appeal to the agro-industry have resulted in the TK dryer being sold extensively to both agriculture and the grain industry. Suitable for use indoors or outdoors. All our dryers are made from hot-dip galvanized sheet metal. With the new TK BIG series, Tornum can offer the...

Products by Skandia Elevator AB

  • L-LINE - Belt & Bucket Elevators

  • Model SE140 TVM - Belt & Bucket Elevators

    Model SE140 TVM - Belt & Bucket Elevators

    SE140 TVM is manufactured from galvanised material and in accordance with the EU machinery directives. It is as standard a Category II 3D/0D Elevator and complies with the European ATEX directive 94/9EC. It is suitable for most materials to be handled in a farm drying and storage plant. SE 140 TVM is available in four models: 20, 30, 40 and 60. The different models give the following capacities when feeding on upgoing leg side. Remember that every 1%...

  • L-LINE - Chain & Flight Conveyors

  • Model KTF - Chain & Flight Conveyors

    Model KTF - Chain & Flight Conveyors

    Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC.Reversing is possible for lenghts up to 25 meter. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the...

  • Model KTF/R - Chain & Flight Conveyors

    Model KTF/R - Chain & Flight Conveyors

    Manufactured from galvanized material and in acc. with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22, Electrical...

  • Model KTFb - Chain & Flight Conveyors

    Model KTFb - Chain & Flight Conveyors

    Manufactured from galvanized material and in accordance with the EU machinery directives. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the external is unclassified. If the conveyor operates in a plant where the external atmosphere is classified as Zone 22,...

  • Model KTA - Chain & Flight Conveyors

    Model KTA - Chain & Flight Conveyors

    Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. Brush gear for intermediate outlet cannot be used on KTA. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21 and the...

  • Model KTAb - Chain & Flight Conveyors

    Model KTAb - Chain & Flight Conveyors

    Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° degree conveying. It runs very quiet and is totally enclosed and dust free in operation. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling...

  • Model KTB - Chain & Flight Conveyors

    Model KTB - Chain & Flight Conveyors

    Manufactured from galvanized material and in accordance with the EU machinery directives. It is suitable for 15°, 30° and 45° to horizontal conveying. Brush gear for intermediate outlets can not be used on KTAb. It is as standard a Category II 2D/0D Conveyor and complies with the European ATEX directive 94/9EC. When operating in a farm drying and storage plant handling different types of grain, the internal atmosphere complies with Zone 21...