Only show results in Virginia? Ok

Soil Cultivation equipment for Crop Cultivation

  • Rinieri - Model EL-A - Hydraulic Offset Cultivators

    EL-A hydraulic offset cultivators are new and created to be used with reversibledrive tractor or with front lift. They maintain the same features and efficaciousness of rear mount hydraulic offset cultivator EL, while offering an easier view of the working area. Many models available, with different side shifting lengths and suitable for 1,50 - 6 ...

    By Rinieri S.r.l. based in Forlì (FC), ITALY. from Offset Machinery - Cultivator Product line

  • Clamps for Double Coil Tines

    From 50 up to 100 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • Model Synchroflex - Front Implements

    The choice of tines or of discs complemented by the blade-type roller means versatility in all conditions. When in front of the tractor, the SYNCHROFLEX is highly versatile: cultivating and breaking-up of nitrate, etc. and once it is reversed, it becomes a fast working cultivator with significant surface spreading. It can be equipped with tines or ...

    By Franquet based in Guignicourt, FRANCE. from Front Implements Product line

  • Echo - Model TC-210 - Tillers and Cultivators

    21.2 cc Power Boost Vortex engine. Four, 10-tooth reversible, hardened-steel tines feature a lifetime warranty and provide smooth tilling action for up to 9' wide furrows. Kickstand for easy storage. Waterproof stop switch and throttle control located at operators fingertips. Worm gear-type transmission (42:1) reduction) provides high tine rpm and ...

    By Eversharp Power Equipment Inc. based in Medina, OHIO (USA).

  • JYMPA - Chisel Cultivator

    The CHISEL CULTIVATOR is a machine specially designed for the preparation of the soil. It comes with two or three rows of tines which allow working in fields with abundant stubble. All models are ready to adapt a roller with screw augers.

    By JYMPA GROUP based in Castellserà Lleida, SPAIN. from Cultivators Product line

  • Kverneland - Model TLC - Vibro Cultivator

    Thanks to its excellent weight distribution, precise depth control and optimum ability to follow ground contours the Kverneland TLC seedbed combination produces a perfect seedbed in all types of soil. The finer soil particles are deposited in the lower level of the tilth to promote rapid and uniform germination and also to prevent loss of moisture ...

    By Kverneland Group based in Klepp St., NORWAY. from Soil Equipment - Cultivators- Seedbed Cultivators Product line

  • Cultivator Points

    Integral heat treatment, guarantee of long life. Characteristics: Boron steel. Hardness: 50 ± 2 HRc. Integral hardening to avoid deformations and rupture. Product uniformity guaranted by strict controls on quality and the production process.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • Bellota - Vibro Tines

    Uniformity guarateed by the pre-tension. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each material with optimum characteristics. Pre-tensioned: Eliminate the first deformations to maintain the shape and be able to provide a consistent job. Epoxy ...

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • Easyflow - Model WT6868 or WT7774 - Light Tine Cultivator

    The Aitchison wideline cultivator is designed as a finishing machine for field cultivation. It is a trailed 6.85 metre (23 foot) or 7.75 metre (25 foot) folding machine ideally suited for those wishing to minimise seed-bed preparation time. The floating gangs follow the ground contour giving unequalled coverage. The Easyflow utilises a unique ...

    By Reese Group Ltd based in Palmerston North, NEW ZEALAND. from Aitchison - Cultivators Product line

  • Herculano - Model HD RH - Fixed Disc Plough

    Hydraulic 3, 4 and 5 discs plough. Structural tube frame. Easy assembly with tractor 3-point linkage. Protection Guard of the flange hubs. Furrow wheel adjustable in height and tilt. 600 mm spacing between discs. Regulation of the horizontal angle of attack (keeping the working width) - 4 and 5 discs models.

    By HERCULANO Alfaias Agrícolas, SA based in Oliveira de Azeméis, PORTUGAL. from Rotary Cultivator-Plough Product line

  • Model 7000 - Blade Cultivator

    Nobleford, Alberta is the birthplace of the Blade Cultivator concept, to conserve moisture and leave stubble standing. The NEW NOBLE Blade Cultivator has been built since the early 1940's and the mechanical trip model is the latest technological improvement making the Blade Cultivator available to areas where rocks did not allow the use of Shear ...

    By Agri-Tech Manufacturing Ltd based in Nobleford, ALBERTA (CANADA). from Agricultural Product line

  • Model MC280 - Cultivation

    The MC280 is available with either an 8.5 hp recoil start or a 10 hp electric start diesel engine. But the standard 70cm Rotor Hoe (with an optional transfer wheel if required) is only the first of many uses for this powerful and versatile pedestrian tractor. Within just a few minutes easy to fit attachments can convert the power unit into a whole ...

    By Enginetech Limited based in Lemington, UNITED KINGDOM. from Cultivation Product line

  • Tortella - Model T 45 Series - Heavy Duty Rotary Cultivator

    HEAVY DUTY ROTARY CULTIVATOR with gear drive or chain drive with 4 speed gear change. For use with tractors from 45-105 hp. Working depth 9”, working widths from 63” to 98”. Should not be mounted on tractors with low PTO.

    By TORTELLA S.P.A. based in Ortona (CH), ITALY. from Tortella Rotary Tillers Product line

  • Lilliston Gangs Cultivator

    Lilliston Gang - available in Disc Gangs of Spider Gangs from a 3 gang up to 5 gang configuration. Spiders in gangs all durafaced.

    By Ellis Equipment based in Kingaroy, AUSTRALIA.

  • Synkro - Model 3 - Bank Stubble Cultivator

    Three-gang mounted stubble cultivators - working width 3 to 5 m.

    By PÖTTINGER Landtechnik GmbH based in Grieskirchen, AUSTRIA. from Tillage - Stubble Cultivators Product line

  • Model CT3080 - 3080R - 3 Rows Mounted Fix and Foldable Cultivator

    The CT 3080 and 3080R cultivators are basically 2 frames with 3 rows of tines in a 80 x 80 mm section,one is rigid and the other is foldable by 2 double-acting rams. 3 types of tines can be fitted on these 2 frames, with a 230 mm spacing. The double spiral tines CPI square of 25 mm and CHS square of 30 mm have the same characteristic of vibrating ...

    By RAZOL S.A. based in TONNEINS, FRANCE. from Tine Implements Product line

  • Model PTO Drive - Cultivator

    Available in a range of brands, sizes & configurations, inter row cultivators can be utilised to work either in between rows of plants or in tractor furrows. PTO driven, they are extremely robust & can work in conjunction with other attachments.

    By GT Tractors PTY Ltd. based in Devon Meadows, AUSTRALIA.

  • IH - Model Cub Series - Tractor with Cultivator

    Make:IH. Model:Cub. Unit Description: with cultivator

    By Galer Farm Equipment Ltd. based in Dundas, ONTARIO (CANADA). from Tractors Product line

  • GENERATOR - Model AU 2.7 - Cultivator

    Length mm 1370.  Width mm 3000.  Height mm 1115

    By TAD-LEN based in Rawicz, POLAND. from Agricultural Machines Product line

  • Model VCM-Fast Y1B - Cultivation Medium for Spoilage Yeasts

    We recommend VCM-Fast Y1B for yeast enrichment used in subsequent VIT Spoilage yeasts analysis. The liquid enrichment medium produces rapidly convincing results. Provided to you in convenient VCM dosage units you don't need to meter anymore – economic work without much effort. Package size: 10 VCM dosage units. The application is very easy: ...

    By Vermicon AG based in Munich, GERMANY. from Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you