Tine Cultivator Equipment For Crop Cultivation
-
Distributed by McCord Machinerybased in NORTHERN IRELAND
Europart electric spinners are suitable for spreading grass seed, rape, other small seeds and slug pellets. The machine is fitted with a 12 volt heavy duty motor and an electrically operated shutter for controlling the sowing operation.These electric spinners can be mounted on many different types of machines from ATV's to chain harrows, power harrows of spring tine Harrows as well as often being ...
-
Manufactured by Guttler GmbHbased in GERMANY
The SuperMaxx with 5 m working width requires the same amount of traction force as a 3-metre cultivator. Depending on the type of soil, 100 to 140 bhp is sufficient to run the machine. What is more, the SuperMaxx saves 40% of the turning time on headland. Fuel consumption cut by half: Thanks to the flat and finely-crumbled processing of the soil, only 5 l/ha diesel is required and therefore less ...
-
Manufactured by Alpego S.p.a.based in ITALY
The trailed folding tine chisel cultivator CAYMAN CB is manufactured in the working widths 4 and 5 m. with a transport width of 2,5 m. It is ideal for tractors from 160 to 320 HP. The new tine chisel cultivator CAYMAN is characterized by its versatility, ideal for mixing the residue in the top layer of the soil and for its complete interment, thanks to the 3 rows of chisels, pace 300 mm, ...
-
Manufactured by Bellota Agrisolutionsbased in SPAIN
From 50 up to 80 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements. The clamps for the Bellota vibro cultivator tines can be mounted on cultivators with frames from 40x40 up to frames of 80x80. It should be taken into account that when the tine is assembled with a reinforcement the clamp must be adapted as well. In the table ...
-
Manufactured by Alpego S.p.a.based in ITALY
The rigid tine chisel cultivator CAYMAN CA is available in the working widths 3 and 3,5 m. and it is ideal for tractors from 120 to 240 HP. The tine chisel CAYMAN is characterized by its high versatility and is ideal both for mixing the residue in the top layer of the soil and for its complete interment, thanks to the 3 rows of chisels, pace 300 mm, and to its considerable height. It is ...
-
Manufactured by Cousins of Emneth Ltdbased in UNITED KINGDOM
Cousins’ Surface cultivator is a product of the ongoing ‘i-tillage’ programme with agronomists Hutchinsons. By cultivating the top 50mm of soil it has proven highly effective against black grass and won the IMMA innovation award for cultivation kit at Cereals 2014. The International Manufacturer's Machinery Awards recognise the best new farm equipment on the market and aim to ...
-
Manufactured by Badalini Srlbased in ITALY
The great accuracy we use in the production of our inter-row cultivator allows the machine to work very close to the plant, without any damage for it. The particular pressure spring it is provided with, keeps SH/ on soil and allows the penetration without problems, even in hard ...
-
Manufactured by Cross Agricultural Engineering Ltd.based in IRELAND
The Cross Ring Roller Range is manufactured in widths from 3 meters to 12.2 meters. All Cross Rollers are fitted with custom manufactured steel rings as standard. Cast iron rings can be fitted also upon request. EN24T shafts are also fitted as standard. Cross Rollers are now fitted with 60mm bearings as standard. All Cross Rollers can be fitted with a selection of various tine tool bars. ...
-
Manufactured by AGRISEM International S.A.S.based in FRANCE
The Agromulch Silver is a cultivator with three rows of tines equipped with shear-bolt or non-stop spring security.This tine cultivator is suitable both for shallow stubble incorporation of crop residues in the soil and also for a deep soil preparation.Its use goes of the superficial stubble-breaking to 5 cm up to 15 cm deep.This machine can also be equipped with retracted point blades allowing ...
-
Manufactured by Hillside Cultivator Company, LLCbased in USA
The Tuff-Bilt is well suited for cultivation with twenty inches ground clearance and good visibility. The Tuff-Bilt is very maneuverable with a hydrostatic transmission and 84” turn ...
-
Manufactured by Wingfield Manufacturing, LLCbased in USA
The Wingfield EconoDrag ATV Harrow is our smallest model of drag harrow, and is available in widths from 4' 0" - 6' 5". All Wingfield ATV drag harrows are 5' 0" in length and come in two mats (front and rear). It is ideal as a larger garden tractor drag or as a ATV ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
The BASELIER Hydraulic Folding Full Width Rotary Hook Tine Cultivator is designed for effective cultivation of beds before planting or sowing and also of grass land and other stubbles. Models are available up to 9.1 metres in width. All Baselier FKV Series Rotary Hook Tine Cultivators are now available with a rubber top plate as a factory fitted option. The rubber top plates replace traditional ...
-
Manufactured by Rolmakobased in POLAND
The U 453 skimming cultivator is mounted onto 3 - point tractor suspension system. In two rows, there are rigid tines fixed to the cultivator's frame, which cut and mixes the crop residue. The rolling coulters and the string roller allow crushing and levelling the soil layers. The cultivator's frame is constructed with the use of shapes and flat bars; however the string roller is made from flat ...
-
Manufactured by Philip Watkins Ltdbased in UNITED KINGDOM
We manufacture a range of tined cultivators from light spring tines to heavy duty ripper tines both in mounted and trailed options. 4m Ripper with 15 legs, optional level boards and packer. 6m Spring Tine. Complete with eradicator tines, front and back level boards, 4 rows of spring tines and following harrow. 5m cultivator complete with 2 rows rigid shear bolt tines, Hydraulic level board, Tyre ...
-
Manufactured by Corner Machinery Ltd.based in TURKEY
Cultivator is manufactured with 7-9-11-13 tines. It cultivate deeply for preparing seed bed loosing the soil cutting root crops and improving the water ...
-
Manufactured by Wingfield Manufacturing, LLCbased in USA
The Wingfield Heavy-Duty American Harrow Cart is the largest and strongest harrow cart in the industry. These custom made carts come in sizes from 36' - 50' and provide a high-quality harrow cart for the large operator. The center frames are expandable up to 20' and the wings are expandable up to 14' to provide a cart that fits any need. Hydraulic folding wings come as standard equipment on all ...
-
Manufactured by Teagle Machinery Ltdbased in UNITED KINGDOM
Vario 250 - 2.5m working Width - 4 tines. Vario 300 - 3.0m Working Width - 6 tines. Models rated from 100HP to 200HP / Category 2 linkage . Available with optional Polymat Compact seed ...
-
Manufactured by Perrein SASbased in FRANCE
The working speed of up to 15km/h, insures high hourly output. At work the drill is carried by the rear roll and the hitch. The top link is in floating mode, the carried drill runs like a trailed drill. Available from 3m to 8m width, it suits your ...
-
Manufactured by Maxim Manufacturing Corporationbased in USA
Perfect for smaller gardens, this human powered cultivator will furrow, weed and plow your tilled soils. It’s been around for generations because it’s easy to push and maneuver. The 4-1/2' handles provide excellent leverage and ...
-
Manufactured by ALPLER Ziraat Aletleri A.S.based in TURKEY
S Tines with additional support all manufactured from special steel. Different share types for different solutions. Due to the vibrations, reduction of traction force. Good clearance for trashy conditions where the quantity of trash may otherwise cause ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you