flow-indicator Downloads
17 downloads found
Rotation shall be in a clockwise directionThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.a) hydraulic capacity 10 MGD (37,800m3/day)b) satisfactory operation shall occur under conditions of zero flowc) head loss at peak flow shall not exceed 20 inches (508)d) design shall be such that the ...
Rotation shall be in a clockwise direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.3(a) hydraulic capacity 1.2 MGD (4500m /day)(b) satisfactory operation shall occur under conditions of zero flow(c) head loss at peak flow shall not exceed 10 inches ...
With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or sur-face water. ...
Rotation shall be in a r clockwise (standard) / r counter-clockwise (optional) direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.3(a) hydraulic capacity 3.5 MGD (13200m /day)(b) satisfactory operation shall occur under conditions of zero flow(c) head loss at peak ...
Rotation shall be in a r clockwise (standard) / r counter-clockwise (optional) direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.3(a) hydraulic capacity 4.5 MGD (17,000m /day)(b) satisfactory operation shall occur under conditions of zero flow(c) head loss at peak ...
Rotation shall be in a r clockwise (standard) / r counter-clockwise (optional) direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.3(a) hydraulic capacity 1.2 MGD (4500m /day)(b) satisfactory operation shall occur under conditions of zero flow(c) head loss at peak ...
Rotation shall be in a r clockwise (standard) / r counter-clockwise (optional) direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.3(a) hydraulic capacity 3.5 MGD (13,200m /day)(b) satisfactory operation shall occur under conditions of zero flow(c) head loss at peak ...
Valves will have a 2 year warranty.Flow Meter: • Raven RFM15 Standard equipment, .3-15 gpm • Orion Flow Meter Option: Digital technology converts fluid on flow into gpm, these precise flow meters work by utilizing sensors to relay pulse signals and converting them into gpm ...
DeMax and DemaTronDetachers Simply smart detacher systems for all milking parlorsn Designed for dependable performance and minimal maintenance.n Rugged construction to perform in tough environments.n Choice of proven flow sensors or milk meters.GEA Milking & Cooling | WestfaliaSurge Simple, convenient controls— ergonomic control panel at each stall plus optional remote start or ...
*Metering orifices can be inserted in place of the Flow Indicator Ball Retainer and utilized to control flows ranging from 0.004 to 8.0 USGPM. Refer to the Flow Indicator section in the Downloads section of www.wilger.net for an orifice selection chart. ...
*Metering orifices can be inserted in place of the Flow Indicator Ball Retainer and utilized to control flows ranging from 0.004 to 8.0 USGPM. Refer to the Flow Indicator section in the Downloads section of www.wilger.net for an orifice selection chart. ...
Rotor Design (i) The star shaped feed rotor fitted behind the pick up on the V6 round baler ensures a high capacity flow of grass into the bale chamber. as crop enters the rotor, rotating tines feed the crop through to the bale chamber. ...
ByMcHale
Industries Inc. with rotation in a counter-clockwise direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.a) hydraulic capacity 130 GPMb) satisfactory operation shall occur under conditions of zero flowc) head loss at peak flow shall not exceed 8 inches (200)d) design shall ...
Industries Inc. with rotation in a counter-clockwise direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.a) hydraulic capacity 315 GPM (19.9 l/s)b) satisfactory operation shall occur under conditions of zero flowc) head loss at peak flow shall not exceed 10 inches (250)d) ...
Industries Inc. with rotation in a counter-clockwise direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.a) hydraulic capacity 315 GPM (19.9 l/s)b) satisfactory operation shall occur under conditions of zero flowc) head loss at peak flow shall not exceed 10 inches (250)d) ...
Industries Inc. with rotation in a counter-clockwise direction.1.1 Design CriteriaThe comminutor shall be designed to handle the flows indicated below, within the head loss noted.a) hydraulic capacity 850 GPM (53.6 l/s)b) satisfactory operation shall occur under conditions of zero flowc) head loss at peak flow shall not exceed 10 inches (250)d) ...
=??Emitter?flow?rate?(“050”?=?½?gph,?“1”?=?1?gph,??“2”?=?2?gph,?and?“4”?=?4?gphxx? ...