Model PW8 - Pick-Up Header Brochure

MACDON PW7 PICK-UP HEADERPut your harvesting on fast-forward.12317 MacDon PW7 Pick-up Header Brochure 2009.indd 1 08/20/09 2:33:44 PMPW7 Pick-uP header features n New header mounting allows the auger to be mounted closer to the feeder chain for better feeding.n Single point hook up for hydraulics, electrical and locking pins.n ?Left-hand PTO hook-up.n PTO shafts come with radial pin clutch.n Chain tension is adjusted by moving PTO drive, eliminating the chain tension idler.n Replaceable floor panel.n Ultra float suspension system carries and supports pick-up.n Durable polyethylene side safety shield.n ?Finger timing and auger chain tension can get adjusted without removing side shields.rake uP™ series iV features n ?Built to pick more crop, especially in tough conditions.n Built to leave stones behind.n ?Hydraulically operated crop hold-down.n Standard plastic teeth with optional steel.n ?New large 20 x 10 – 10 flotation tires.n New wheel height adjustment.n Ultra float suspension.sWathmaster™ series iV features New features and design for improved performance, reliability and operator convenience.n Front belt rear roller middle support, now standard on the 16' model to greatly reduce belt slippage.n Orbit motor on front belt for direct pull, with self-tightening V-belt drive of rear belt.n New wheel height adjustment and new large 20 x 10 – 10 flotation tires along with ultra float suspension for improved stability, reduced wheel bounce and reduced ground pressure.n Reduced number of grease points.n Draper roller mounting position reduces grain loss and back feeding.n Hydraulically operated crop hold-down.n High quality plastic fingers are standard, steel teeth are optional.Prices, specifications and options subject to change without notice. Products subject to availability. Products featured may include available options. MF12317 Printed in Canada 08/2009 Part #147550www.macdon.comrake-uP™ iV sPecificationsSize 14 ft. (4.27 m) 16 ft. (4.88 m)Number of 19 in. Draper Belts 8 9Actual Picking Width 154 in. (3 912 mm) 175 in. (4 445 mm)Mounting Bracket Width 169 in. (4 293 mm) 188 in. (4 775 mm)Shipping Weight 1,450 lbs. (657.7 kg) 1,600 lbs. (725.7 kg)Overall Width to Edge of Tires 204 in. (5 182 mm) 223 in. (5 664 mm)sWathmaster™ iV sPecificationsSize 14 ft. (4.27 m) 16 ft. (4.88 m)Number of 19 in. Draper Belts 8 9Actual Picking Width 152 in. (3 861 mm) 171 in. (4 343 mm)Mounting Bracket Width 163 in. (4 140 mm) 182 in. (4 623 mm)Shipping Weight 1,650 lbs. (780.4 kg) 1,700 lbs. (771.1 kg)Overall Width to Edge of Tires 190 in. (5 826 mm) 209 in. (5 309 mm)PW7 Pick-uP header sPecificationsHeader Size 13 ft. (4 m) 15 ft. (4.6 m)Weight 1,550 lbs. (703 kg) 1,600 lbs. (726 kg)Overall Width 171 in. (4 343 mm), 192 in. (4 877 mm) with clearance lights 190 in. (4 826 mm) 211 in. (5 359 mm) with clearance lightsOverall Height 45 in. (1 143 mm) with clearance lights 45 in. (1 143 mm) with clearance lightsOverall Depth 35 in. (889 mm) 35 in. (889 mm)Header Opening Width 154 in. (3 912 mm) 173 in. (4 394 mm)Auger Diameter 24 in. (610 mm) 24 in. (610 mm)Auger Fingers 0.625 in. (16 mm) induction hardened, 18 - 24 fingers (depending on machine)Auger Speed 150 - 217 RPM (depending on combine)Drive Shaft Heavy duty, fully shielded with built-in clutchmacdon locations around the WorldWinnipeg, Canada | Kansas City, United States | Melbourne, Australia | Moscow, Russia12317 MacDon PW7 Pick-up Header Brochure 2009.indd 2 08/20/09 2:33:44 PM