PGV Series - Industrial Snowblower Brochure

40 years of innovation at your service40 years of dedicated research and development has made Pronovost the leader in the manufacturing of snowblowers. No wonder, our customer feedback and our field testing with experienced end users have been guiding our snowblowers’ evolution to really meet your needs. Pronovost – the true winter specialist.Think ahead.Think money.Think PronovostIndustrial Snowblowers - Large Open Flight Auger Semi-industrial SnowblowerNouveau Industrial Snowblowers - Full Flight AugersNewNew3 categories of high performance snowblowersTo beat the worst winters,the pros use Pronovost INDUSTRIAL SNOWBLOWERSLarge OPeN FLIgHT aUgerPronovost IngenuItyAugersAssembled on quick dismount hubs designed for easy removal and oversized bearings for intensive service.High Performance Impeller Interchangeable HARDOX450 blades. Inverted rotation allows the snow to be blown closer to transport trucks for more efficiency.extra Heavy-Duty 3 Point Hitch Less strain is put upon the 3 point hitch since the center of gravity is closer to the tractor. Design exclusive to Pronovost1. Choice of a semi-industrial chute or the new industrial telescopic hydraulic chute redesigned for superior performance.2. 20’’ upper auger with welded carbon steel teeth on PGV-1022TRC-220. 3. Welded carbon steel teeth on removable auger flight sections. 34’’ auger diameter (PGV-1021TRC-150 and PGV-1022TRC-220).4. Heavy-duty frame thanks to steel reinforcing plates installed at strategic points for structural integrity.5. Four adjustable skid shoes for an outstanding durability.235146NewPGV-1022TRC-220PCT-InD PCTC-InDRPCTC-InDLarge OPeN FLIgHT aUgerPronovost IngenuItyA FeW InterestIng oPtIons Inverter gear Box(1000 / 562) Allows adjustment for the input shaft’s height to maximize working angle for less downtime.More performance. More productivity.Pronovost increases your profitability.renold 100Hv roller Chain Protected by an enclosed oil bath and fitted with a self adjusting heavy-duty tensionner allowing you to work over extended periods without servicing.8’ Directional Hydraulic Drift Cutters For better performance in hardened snow. Also available: stationary drift cutters made of HARDOX450 steel (see #6).Lateral Carbide skid shoesTo prevent premature wear caused by curbs and sidewalks.easy Impeller Adjustment For optimum efficiency year after year.NewA BreAK-tHrougH In tHe snoW reMovAL WorLD• Less snow spillover • Less snow leftover on the ground• Less demanding on your engine since the snowblower is easier to turn• Easier to go through hardened snow or ice• More fun to use PGV-1021TRC-1503How does it work? To discover it, check out our video at www.pronovost.qc.ca. FULL FLIGHT AUGERSPronovost IngenuItyextra Heavy-Duty ImpellerBalanced and with six curved replaceable carbon steel blades.Both Augers protected by a shear boltEasily accessible for maintenance.Quick adjustment skid shoesEquipped with carbide wear plates. 1. Telescopic chute equipped with precision machined; greasable hinges. Two double-acting slide cylinders assure a vertical displacement of 32’’ (81,3 cm).2. Front access panels open rapidly to increase efficiency even in the most severe snow conditions.3. Adjustable carbide skid shoes.4. Steel reinforcing plates at strategic points.5. Removable carbon steel cutting edge set on a 6° angle.6. Extra capacity roller bearings with ductile cast iron flanges for intensive serviceP-982TRC-150126543 FULL FLIGHT AUGERS Sturdier and Lighter Snowblowers. Pronovost increases your profitability.A FeW InterestIng oPtIons PCt-InD telescopic Chute Equipped with HARDOX450 steel wear plates on the inside.Drift Cutters Also available: hydraulically controlled drift cutters made of HARDOX450 steel.Pronovost IngenuItyeasy Impeller AdjustmentsFor optimum efficiency year after year.1. Chute bases equipped with a UHMW slide system which rotates easily. Physical properties of UHMW also prevent the chute from freezing.2. no. 9 multi-lobe PTO shaft.3. Extra heavy-duty 3 point hitch. Exclusive to PronovostP-1022TRC-2001 233 gear reducer1000 / 555 or 1000 / 562 reducers in option.5How does it work? To discover it, check out our video at www.pronovost.qc.ca.Pronovost IngenuIty1. Impeller designed to remove an propel snow efficiently. Assembled, welded, and balanced with precision.2. A unique industrial strength, open flight, spiked auger with replaceable sections.3. Two skid shoes adjustable in seconds.oil Bath To ensure an excep tional life of the Renold 100 HV chain.Hydraulic Motor, rack & Pignon For the most efficient drum rotation.Chain tensionner Extra heavy-duty industrial design.NewPGS-1020TRCPCT-92104 321SEMI-INDUSTRIAL SNowbLowERMore productivity at affordable prices. Pronovost increases your profitability.Auger Drive shaftMounted on over sized ball bearing and easy access shear bolt. Lube Points Easy to access for enhanced longevity.Engineering and design unique to Pronovost result in the most resistant and efficient products of the industry. Pronovost, leading the way.Adjustable ImpellerUnique to Pronovost.Bolted Auger FlangeFor quick dismount.Impeller HousingMade of wear resistant HARDOX450 steel for optimal longevity.PGS-1020TRC7How does it work? To discover it, check out our video at www.pronovost.qc.ca. technical specification chartcategory large open flight auger full flight augers semi-industrialmodel pgV-1021trc pgV-1022trc pgV-1202trc p-982trc p-1022trc pgs-1020trcRecommended power 100 to 200 HP 175 to 300 HP* 175 to 300 HP* 100 to 200 HP 175 to 300 HP* 100 to 150 HPApproximate performance (tractor) 1600 Imp. tons / h (150 HP) 2500 Imp. tons / h (200 HP) 2500 Imp. tons / h (200 HP) 1400 Imp. tons / h (150 HP) 2200 Imp. tons / h (200 HP) 1500 Imp. tons / h (150 HP)Height of telescopic chute(in working position)129’’ closed 160 1/2’’ extended (approx.)131’’ closed 162 1/2’’ extended (approx.)131’’ closed 162 1/2’’ extended (approx.)120’’ closed 150’’extended (approx.)121’’ closed 151’’extended (approx.)127’’ closed 158’’extended (approx.)Height of chute base 52’’ 54’’ 54’’ 51’’ 52’’ 50’’Chute rotationWith hydraulic motor and cushion valve includedWith hydraulic motor and cushion valve includeWith hydraulic motor and cushion valve includeWith hydraulic motor and cushion valve includeWith hydraulic motor and cushion valve includeOn UHMW, for hydraulic motorHeight of shroud 53’’ 68 1/4’’ 68 1/4’’ 52’’ 59’’ 47 1/2’’Height of drift cutters Std : 59’’ CL : 78’’ CLH : 78’’Std : 75 1/2’’ CL : 96 1/2’’ CLH : 96 1/2’’Std : 75 1/2’’ CL : 96 1/2’’ CLH : 96 1/2’’Std : 59’’ CL : 77’’ CLH : 77’’ Std : 62’’ CL : 84’’ CLH : 84’’Opt. : 65 3/4’’Working width 1 102’’ 102’’ 118 1/4’’ 98’’ 102’’ 102’’Drum diameter 34’’ 37’’ 37’’ 34’’ 37’’ 34’’Depth of drum 15’’ 15’’ 15’’ 15’’ 15’’ 15’’Drum rotationWith hydraulic motor and cushion valve includedWith hydraulic motor and cushion valve includedWith hydraulic motor and cushion valve includedWith hydraulic motor and cushion valve includedWith hydraulic motor and cushion valve includedOn UHMW, for hydraulic motorDrum position Offset 6“ to the right Offset 5“ to the right Offset 5“ to the right Centered Centered CenteredDrum construction 1/4’’, 450 carbon steel 3/8’’, 450 carbon steel 3/8’’, 450 carbon steel 1/4’’, 450 carbon steel 3/8’’, 450 carbon steel 1/4’’, 450 carbon steelNumber of impeller blades6 x 3/8’’ carbon steel replaceable blades6 x 3/8’’ carbon steel replaceable blades6 x 3/8’’ carbon steel replaceable blades6 x 3/8’’ carbon steel replaceable blades6 x 3/8’’ carbon steel replaceable blades6 in standard steel, weldedImpeller shaft diameter and height 2’’ diam. • 22 1/4’’ height 2 1/2’’ diam. • 24’’ height 2 1/2’’ diam. • 24’’ height 2’’ diam. • 21 3/4’’ height 2 1/2’’ diam.• 23’’ height 2’’ diam. • 22’’ heightDirection of rotation of impeller CW CW CW CCW CCW CCWImpeller rotation speed 540 RPM 540 RPM 540 RPM 540 RPM 540 RPM 540 RPMRPM required for the tractor PTO 1000 RPM 1000 RPM 1000 RPM 1000 RPM 1000 RPM 540 RPM • Opt. 1000 RPMSpeed reducerIncluded 21000 / 562- 250 HP (rotation inverter)Included 21000 / 562 - 250 HP (rotation inverter)Included 21000 / 562 - 250 HP (rotation inverter)Suggested option 21000 / 555 - 220 HP (non inverting)Suggested option 21000 / 562 - 250 HP (non inverting)Suggested option 21000 / 555 - 220 HP (non inverting)Oil cooler for speed reducer ---OptionIncreases capacity to 300 HPOptionIncreases capacity to 300 HP---OptionIncreases capacity to 300 HP---Height of speed reducer shaftAdjustable from 27 3/8’’ to 19 1/4’’Adjustable from 29 7/8’’ to 18’’Adjustable from 29 7/8’’ to 18’’13 3/4’’ or 29 3/4’’ (with red. 150 HP)13’’ or 33’’ (with red. 300 HP)14’’ or 30’’ (with red. 150 HP)Standard PTO shaftV90 (choices of yokes as required)V90 (choices of yokes as required)V90 (choices of yokes as required)V90 (choices of yokes as required)V90 (choices of yokes as required)T90 (choices of yokes as required)Optional PTO shaft --- --- --- --- ---V90 (choices of yokes as required)Main augerDual band, bolted, 34’’ diam., carbon steel teethDual band, bolted, 34’’ diam., carbon steel teethDual band, bolted, 34’’ diam., carbon steel teethFull flight 18’’ with welded carbon steel teethFull flight 20’’ with welded carbon steel teethDual band, bolted, 34’’ diameterUpper auger ---Single band, 20’’ diam., carbon steel teethSingle band, 20’’ diam., carbon steel teethFull flight 18’’ with welded carbon steel teethFull flight 20’’ with welded carbon steel teeth---Drive chain of auger(s)No 100 HV Renold chain in oil bathNo 100 HV Renold chain in oil bathNo 100 HV Renold chain in oil bathNo 100 HV Renold chain in oil bathNo 100 HV Renold chain in oil bathNo 100 HV Renold chain in oil bathShear bolts 1 on rotor & 1 on auger 1 on rotor & 1 on augers 1 on rotor & 1 on augers 1 on rotor & 1 on augers 1 on rotor & 1 on augers 1 on rotor & 1 on augerScraper bladesStandard steel 1/2’’ x 4’’ reversible --- --- --- --- --- StandardCarbon steel 1/2’’ x 4’’ reversible --- --- --- --- --- OptionCarbon steel 1/2’’ x 6’’ sharpened Standard --- --- Standard --- OptionCarbon steel 5/8’’ x 6’’ sharpened --- Standard Standard --- Standard ---Stainless steel 1/2’’ x 4’’ reversible --- --- --- --- --- OptionSkid shoesStandard steel (quick adjustment) --- --- --- --- --- Standard • 2 skid shoesCarbon steel (quick adjustment) --- --- --- --- --- Option • 2 skid shoesStainless steel (quick adjustment) --- --- --- --- --- Option • 2 skid shoes (quick adjustment) --- --- --- Standard • 2 skid shoes Standard • 2 skid shoes Option • 2 skid shoes (spacers adjustment) Standard • 4 skid shoes Standard • 4 skid shoes Standard • 4 skid shoes --- --- ---Lateral skid shoe for sidewalks Option Option Option Option Option ---3-point hitch Category 2 hitch pinCategory 2 hitch pin (others available)Category 2 hitch pin (others available)Category 2 hitch pinCategory 2 hitch pin (others available)Category 2 hitch pinFrame: sides 1/4’’ 5/16’’ 5/16’’ 5/16’’ 3/8’’ 1/4’’Frame: back 10 gauge 9 gauge and 3/16’’ 9 gauge and 3/16’’ 9 gauge 3/16’’ 10 gaugeCenter of gravity from 3-point at its shortest39’’ 40 9/16’’ 40 9/16’’ 41 1/4’’ 42 3/4’’ 44’’Torque 173 550 lbs-po 222 079 lbs-po 229 701 lbs-po 174 900 lbs-po 222 300 lbs-po 169 180 lbs-poWeight4450 lbs (2018 kg) with telesc. chute and reducer5475 lbs (2483 kg) with telesc. chute and reducer5663 lbs (2569 kg) with telesc. chute and reducer4240 lbs (1923 kg) with telesc. chute and reducer5200 lbs (2359 kg) with telesc. chute and reducer3845 lbs (1581 kg) with telesc. chute and reducer* With oil cooler option. 1 Without sidewalk skate 2 Consult your dealer to learn about all available reducer models. Design and specifications subject to change without notice.Dealerlitho Canada | Image de Mark inc. P01978-2013/02Les Machineries Pronovost inc.260, Haut du lac Sud, Saint-Tite (Quebec) G0X 3H0, Canada Tel.: 418 365-7551 • Fax: 418 365-7954 info@pronovost.qc.ca www.pronovost.qc.ca